Gear Pumps / Pumps & Accessories - On Sale Now! Save up to 7%


On Sale! Up to 7% off on Gear Pumps (in Pumps & Accessories) at Servis Plumbing [18]. Top brands include Liquidynamics, Concentric, Prince Manufacturing, Duda Diesel, Pumplus, Seaflo, Qiterr, RuggedMade, Hy-Pro, Weldon Racing, uxcell, GPI, Chief, & Thincol. Hurry! Limited time offers. Offers valid only while supplies last.



LiquiDynamics 10007-S1 MA-7-S1 Gear Oil Hand Pump with Cover, Band Dolly and Pint Meter
By Liquidynamics
In Stock
$298.87

mpn: 10007-S1,

4.1 out of 5 stars with 57 reviews
Hand Operated Mobile Gear Oil Pump Kits. Light Duty Gear Oil Hand Pump Systems for 16 gallon drums. Pump, Cover, Dolly, Meter.Lever hand pump. For use with light gear oils. Fits 16 gall.


Concentric/Haldex GC Series Gear Pump: 0.517 CID, 4 GPM @ 1800 RPM and 8 GPM @ 3600 RPM, 2000 Max RPM, 1200 PSI with SAE #10 Port Size, 4-Bolt (1.78'' Dia Pilot) Mounting, Dual Rotation, 250061
By Concentric
In Stock
$237.80

mpn: 250061,

4.6 out of 5 stars with 47 reviews
Concentric Gear Pumps (GC Series): 0.517 CID, Rated GPM: 4. All feature heavy-duty cast iron construction, case drain, viton shaft seal, and outboard ball bearing. Similar to MTE D Series and Sauer-Danfoss Webster YB Series1200 PSI, 2000 RPM. 0.517 Cubic Inch Disp.. SAE 10 Side Inlet Port, SAE 10 Side Outlet. GPM: 8. 4-Bolt (1.78'' Dia pilot) Mount, 1/2'' Dia Straight Keyed Shaft x 1 1/2'' Long.


Prince Manufacturing HC-PTO-2A PTO Pump, Aluminum
By Prince Manufacturing
In Stock
$659.99
$629.99
You Save: 5%

mpn: HC-PTO-2A,

4.1 out of 5 stars with 41 reviews
PTO Drive is 6 Tooth DriveActual displacement: 5.7 CI/Rev, Porting location: Side, Center Section: Aluminum, RPM: 540A feature that contributes to the excellent and long-lived efficiency of the Prince PTO pumps is the minimum clearance between the gears and the center housing. Each pump is assemblied with zero clearance between the housing and the tips of the gear teeth, then test run until the teeth establish a proper wear path in the housing. The result is a much tighter clearance than found i


Duda Diesel YTG-40 Motor Oil Pump, 110V/120V, 550W, Wvo Wmo Grease Vegetable Lubricating, 10.5 GPM Maximum Flow Rate, Stainless Steel
By Duda Diesel
In Stock
$189.69
$186.20
You Save: 2%

mpn: YTG-40, ean: 0840194111720,

4.1 out of 5 stars with 56 reviews
For pumping thick oils such as lubricating oil (motor oil), vegetable oil, animal oil and lighter oils such as diesel fuel or biodiesel the duty cycle of this pump is typically continuous, depending on suction height and head. If a high suction height or large head is required, we recommend the higher power 1100W motor over the 750W motor on the ytb-g-70 Series.40 L/min (10.5Gpm), 0.2MPa (29 psi) max pressure, 110V AC / 60 Hz. Maximum kinematic viscosity of working fluid: 300 cSt, F IP54. 3/4 in


Fister Air Hydraulic Pump 10000 PSI 1/2 Gal Reservoir Air Hydraulic Foot Actuated Pump for Automobile Manufacturing Inspection and Maintenance, Auto Body Frame Machines and Pulling Post
By Pumplus
In Stock
$179.99

ean: 0716464641337,

4.3 out of 5 stars with 53 reviews
Introduction: The working principle of the pneumatic hydraulic pump is to convert the lower air pressure into the high pressure hydraulic oil pressure, that is, to use the low pressure of the large piston end to generate the high hydraulic pressure of the small piston end. Technical Parameters: Type: Air Powered Hydraulic Pump Action: Single acting Control: Foot pedal pump - Release pressure to return fluid Reservoir capacity: 1/2 gallon Shell Material: Strengthen the aluminum alloy Maximum out


Duda Diesel YTG-70-1100w Motor Oil Pump, 110V/120V, 1100W, Wvo Wmo Grease Vegetable Lubricating, 18.5 GPM Maximum Flow Rate, Stainless Steel
By Duda Diesel
In Stock
$312.35

mpn: YTG-70-1100w, ean: 0840194111744,

4.2 out of 5 stars with 18 reviews
For pumping thick oils such as lubricating oil (motor oil), vegetable oil, animal oil and lighter oils such as diesel fuel or biodiesel the duty cycle of this pump is typically continuous, depending on suction height and head. If a high suction height or large head is required, we recommend the higher power 1100W motor over the 750W motor on the ytb-g-70 Series.70 L/min (18.5Gpm), 0.2MPa (29 psi) max pressure, 110V AC / 60 Hz. Maximum kinematic viscosity of working fluid: 300 cSt, F IP54. 1 inch


SEAFLO 12V 3.2GPM 12LPM Low Pressure Electric Gear Pumps for Water Diesel Oil Lubricant Transfer
By Seaflo
In Stock
$79.99

mpn: GP123200301, ean: 6970424901778,

4.2 out of 5 stars with 21 reviews
Features & Benefits Seamless Shell Design Thermally Protected Motor High Quality Efficient Motor Self-priming Stainless Steel Shaft Typical Applications Extreme duty Transmission fluid (Diesel, Lubricant and viscous liquids) Industrial use PUMP Liquid Temperature:140°F (60°C) Max. Priming Capabilities :Not needed flooded suction Power:10 amps max current draw Max Pressure:Not needed Inlet/Outlet Ports :3/8'' FNPT (9.52 mm) thread fitting Weight:5.46 lbs (2.48 kg) MOTOR Type:High quality seamle


Gear Pump, 0.5Mpa 1800r/min Insert Type Lubricating Cycloid Oil Pump (TOP-11A)
By Qiterr
In Stock
$22.86

mpn: Qiterr0b364rchwv-01, ean: 0739551496658,

4.4 out of 5 stars with 55 reviews
Specification: Material: Iron Color: as picture show Package Weight: approx.602-897g Optional Model: TOP-11A  Displacement: 1.6ml/r; Flow: 1500rpm(2.5L/min) 1800rpm(2.9L/min); Pressure: 0.5Mpa; Maximum RPM. 2000r/min TOP-12A  Displacement: 2.5ml/r; Flow: 1500rpm(3.7L/min) 1800rpm(4.5L/min); Pressure: 0.5Mpa; Maximum RPM. 1800r/min TOP-13A  Displacement: 4ml/r; Flow: 1500rpm(6L/min) 1800rpm(7.2L/min); Pressure: 0.5Mpa; Maximum RPM. 1800r/min Package List: 1 * Gear Oil Pump✔[HIGH-QUALITY MAT


Prince Manufacturing HC-PTO-2AC PTO Pump, Cast Iron
By Prince Manufacturing
In Stock
$589.09

mpn: HC-PTO-2AC,

4.5 out of 5 stars with 12 reviews
PTO Drive is 6 Tooth DriveActual displacement: 5.7 CI/Rev, Porting location: Side, Center Section: Cast Iron, RPM: 540A feature that contributes to the excellent and long-lived efficiency of the Prince PTO pumps is the minimum clearance between the gears and the center housing. Each pump is assemblied with zero clearance between the housing and the tips of the gear teeth, then test run until the teeth establish a proper wear path in the housing. The result is a much tighter clearance than found


Prince Manufacturing HC-PTO-1AC PTO Pump, Cast Iron
By Prince Manufacturing
In Stock
$881.23

mpn: HC-PTO-1AC,

4.3 out of 5 stars with 52 reviews
PTO Drive is 6 Tooth DriveActual displacement: 9.9 CI/Rev, Porting location: Side, Center Section: Cast Iron, RPM: 540A feature that contributes to the excellent and long-lived efficiency of the Prince PTO pumps is the minimum clearance between the gears and the center housing. Each pump is assemblied with zero clearance between the housing and the tips of the gear teeth, then test run until the teeth establish a proper wear path in the housing. The result is a much tighter clearance than found


RuggedMade Hydraulic Gear Pump, 11 GPM Single Stage, Clockwise Rotation, 3600 PSI
By RuggedMade
In Stock
$94.88

mpn: CB2A-F11SA, ean: 0757538397699,

4.2 out of 5 stars with 57 reviews
11 GPM Hydraulic Single Stage Gear Pump SpecificationsMax Flow Rate: 11 Gallons Per MinuteMax Pressure: 3,600 PSIOperating Speed: 3,600 RPMRotation: ClockwiseDimensions: 4.12'' x 3.54'' x 4.04''Shaft Diameter: 5/8''Shaft Length: 1-1/4''Keyway: 1/8''Inlet: 1-1/16-12 UNF SAE O-RingOutlet: 7/8-14 UNF SAE O-RingMounting Flange: 2 Bolt Hole SAE AMaterial: Aluminum BodyClockwise rotation. 11 GPM maximum flow rate. 3,600 PSI maximum rated pressure. 1-1/16-12 UNF SAE O-Ring Inlet & 7/8-14 UNF SAE O-Ring


Hypro 5210C Piston Pump, 10 gpm, 3/4" NPT Inlet x 3/4" NPT Outlet, 400 psi
By Hy-Pro
In Stock
$709.55

mpn: 5210C,

4.0 out of 5 stars with 42 reviews
Hypro twin 10 gpm piston pump having 3/4'' NPT inlet size and 3/4'' NPT outlet size features 600 rpm speed and 400 psi pressure ratingHypro 5210C Piston Pump, 10 gpm, 3/4'' NPT Inlet x 3/4'' NPT Outlet, 400 psi.


Weldon Racing D2035-A Flow Fuel Pump (-12 Inlet and -10 Outlet)
By Weldon Racing
In Stock
$891.69

mpn: D2035-A,

4.1 out of 5 stars with 58 reviews
Features: • Self Priming Pump may be mounted above fuel cell vertical or horizontal mount •Breakaway coupling prevents pump/motor damage in the event of fuel contamination • All internal wear components are 100% metallic No plastics or composite materials. Our internal pumping elements are made of high speed tool steel and bronze. This results in the longest lasting, highest quality, most durable pumps available. • Body machined from billet aluminum • For carbureted or injected engines


uxcell Car Motorcyle Gas Oil Water Liquid Transfer Plastic Siphon Pump Hose
By uxcell
In Stock
$19.23

mpn: a12081500ux0439,

4.5 out of 5 stars with 58 reviews
A great way to syphon fuel, petrol, diesel, water, fluid, etc.Used for your car, motorhome, caravan, garage, boat or even your motorcycle ready in case of emergency.Also is used to clean your aquarium or fish tank, keeps a good environment for fishes.Product Name : Siphon Water Pump;Material : Plastic. Color : Clear White, Red;Blue Part Size : 8.3 x 5.3cm/3.3'' x 2.1'' (L*D). Spiral Hose Size : 54 x 1.6cm/21.2'' x 0.6'' (L*D);Straight Hose Size : 32 x 1.4cm/12.6'' x 0.6'' (L*D). Weight : 51g. Pa


GPI 110000-200, M-150S-AV-PO Aluminum Aviation Fuel Transfer Pump, 15 GPM, 12-VDC, Spin Collar, 18' Power Cord
By GPI
In Stock
$358.00
$333.33
You Save: 7%

mpn: 110000-200,

4.0 out of 5 stars with 44 reviews
This GPI M-150S-AV-PO features a rotary gear design and is made from durable and light weight cast aluminum. The 12-VDC motor delivers flow rates up to 15 GPM. The M-150S is the best-selling fuel transfer pump in retail, providing longer run times and award-winning performance year over year. The rugged construction of the M-150S-AV-PO is the pump of choice for dispensing aviation gasoline (AVGAS 100LL) or kerosene (JET A). The M-150S-AV-PO comes with 18-foot power cord, spin collar and lockable


CHIEF Gear Pump: 5/8'' Shaft Diameter, 0.48 CID, 4.16 GPM @ 2000 RPM, 3600 Max RPM, 3626 PSI with SAE #12 Inlet and SAE #10 Output Ports, 2-Bolt A Mount, CCW Rotation, 252435
By Chief
In Stock
$61.39

mpn: 252435,

4.9 out of 5 stars with 20 reviews
Chief Gear Pumps (5/8'' Diameter): 0.48 CID, Rated GPM: 4.16, CCW Rotation. 5/8'' Diameter Stright Keywed Shaft 1 1/4'' Long or S9 9 Tooth Spline Shaft - 2 Bolt A Mount3626 PSI, 3600 RPM. 0.48 Cubic Inch Disp.. SAE 12 Inlet Port, SAE 10 Outlet. GPM: 4.16. 5/8'' Diameter Stright Keywed Shaft 1 1/4'' Long or S9 9 Tooth Spline Shaft - 2 Bolt A Mount.


Prince Manufacturing HC-PTO-1A PTO Pump, Aluminum
By Prince Manufacturing
In Stock
$748.10
$738.61
You Save: 1%

mpn: HC-PTO-1A,

4.5 out of 5 stars with 28 reviews
PTO Drive is 6 Tooth DriveActual displacement: 9.9 CI/Rev, Porting location: Side, Center Section: Aluminum, RPM: 540A feature that contributes to the excellent and long-lived efficiency of the Prince PTO pumps is the minimum clearance between the gears and the center housing. Each pump is assemblied with zero clearance between the housing and the tips of the gear teeth, then test run until the teeth establish a proper wear path in the housing. The result is a much tighter clearance than found i


Oil Pump, Oil Pump Auto Oil Fuel Suction Pump Auto Engine Oil Diesel Rinse Pump Self Priming Pump Pump Automotive Oil Pump Diesel Pump Electric Lubrication Gear Pump 250 (m³ / h)(24V 3A 60W)
By Thincol
In Stock
$39.59

mpn: Thincolgdaq32itw9-02, ean: 0739879536098,

4.9 out of 5 stars with 29 reviews
Specification: Material: Plastic Pump shaft position: horizontal Impeller suction: single suction type Driving mode: electric Performance: oil changing, corrosion resistant, automatic Use: change car oil Principle: vane pump Conveying medium: oil pump Scope of application: automobile engine oil change Flow:250 (m³/ h) Lift :1.5 (m) Impeller structure: scribing Number of impeller: multi-stage Weight: 860g/30.3oz Power: 60W Voltage & Current: #01 12V 5A ; #02 24V 3A (Optional) Inhalation aperture


CHIEF PTO Gear Pump: 9.9 CID, 2250 PSI, 1 3/8'' Dia. 6 Tooth Drive Shaft, 21 HP, 21 GPM, 2250 PSI, 540 RPM with SAE #16 Inlet and SAE #12 Outlet Ports, 252560
By Chief
In Stock
$528.75

mpn: 252560, ean: 0615986018989,

4.0 out of 5 stars with 39 reviews
Self-adjusting wear plates both sides. Two outlet ports with plug to seal unused port. Roller bearings. Internal spline with thru-drive feature. High tensile cast iron end plates. Slips on tractor PTO (no gear box required).PTO Gear Pump, 1 3/8'' dia. 6 tooth Drive Shaft, 9.9 C.I.D. 21 GPM, 2250 Max PSI, 540 Max RPM. 21 HP Input, SAE #16 Inlet and SAE #12 Outlet Ports.


GPI 110700-04, M-11150S-Methanol-PO Aluminum Fuel Transfer Pump Only, 12 GPM, 115-VAC, Spin Collar Mount
By GPI
In Stock
$607.00

mpn: 110700-04,

4.0 out of 5 stars with 14 reviews
This M-1115S-METHANOL-PO features a rotary gear design and is made from durable and light weight cast aluminum. The 115-VAC motor delivers flow rates up to 12 GPM.M-115S-METHANOL-PO has a nickel plated housing to prevent corrosion. The M-1115S series is the pump of choice for stationary locations in fleet, agriculture or industrial applications. The M-1115S-METHANOL-PO is ideal for dispensing methanol and comes with lockable nozzle cover and spin collar. Ideal for dispensing methanol fuel. Pump



Viewing Page 1 of 4

Browse Our Catalog




Privacy Policy / Terms of Service / Accessibility Statement
© 2020 - servisplumbing.com. All Rights Reserved.