Bearing Isolators / Seals & O-Rings - Page 2


Save on Bearing Isolators (in Seals & O-Rings) at Servis Plumbing, Page 2 [29]. Top brands include LUMBERG AUTOMATION, Macromatic, Elko, & FINDER. Hurry! Limited time offers. Offers valid only while supplies last.



Lumberg Automation RKMWV 3-294/2 M, Female Right Angle, 3 Pin, 2 M, M8 Molded Cable
By LUMBERG AUTOMATION
In Stock
$20.13

mpn: 5604, ean: 0044761077000,

4.2 out of 5 stars with 29 reviews
The Lumberg Automation 5604 RKMWV 3-294/2 M M8 female right angle molded cable features a 3 pin insert compatible a nominal voltage of 30V, a rated current of 4A and 2 meters of cable. Protection class IP 67, IP 68 / NEMA 6P. The cable is covered in black PVC, and the contacts are copper alloy. It is designed to compatiblestand vibration and is used primarily in actuator/sensors and other small size applications. Specifications Housing Color- Transparent Gray; Cable Type-Black PVC; Type of Conta


Macromatic ARP024A5R DPDT 24V Cross Wired Duplexor Alternating Relay
By Macromatic
In Stock
$125.68

mpn: ARP024A5R, ean: 0044761084633,

4.6 out of 5 stars with 33 reviews
The Macromatic ARP024A5R is an alternating relay. This 8 Pin plug-in relay has a control voltage of 24V AC. It is a DPDT cross wired duplexor relay used in situations where the run time of two loads has to be equalized and when more load capacity is necessary. It has a 10A DPDT cross wired output. It can be used compatible two or three control switches, which initiate the alternating action. The output contacts on the relay change state when the initiating switch opens, so the loads alternate. I


Macromatic TD-70522 Time Delay Relay, Interval On, 120V AC/DC, Digital Set
By Macromatic
In Stock
$113.68

mpn: TD-70522, ean: 0044761084336,

4.5 out of 5 stars with 11 reviews
The Macromatic TD-70522 is an Interval On Time Delay Relay. This 8 pin plug-in relay has an input voltage of 120V AC/DC compatible an output of 10A DPDT. It has a time range of 0.05 sec to 999 hours. The unit has one pushbutton thumbwheel that chooses one of seven time ranges, while three other thumbwheels digitally set the precise time delay compatiblein that range. The red LED indicates the status of the timing mode and time out conditions. The TD70522 uses an 8 pin 70169-D octal socket. Note:


Macromatic ARP024A2R DPDT 24V Duplexor Alternating Relay
By Macromatic
In Stock
$125.68

mpn: ARP024A2R, ean: 0044761084602,

4.7 out of 5 stars with 52 reviews
The Macromatic ARP024A2R is an alternating relay. This 11 Pin plug-in relay has a control voltage of 24V AC. It is a DPDT duplexor relay used in situations in which the run time of two loads has to be equalized. It has an output of 10A DPDT. It can be used compatible one or two control switches, which initiate the alternating action. The output contacts on the relay change state when the initiating switch opens, so the loads alternate.It uses an 11 pin 70170-D octal socket.Note: Image is an appr


Macromatic PMP120 Multi-Detection 120V Phase Monitor Relay
By Macromatic
In Stock
$157.07

mpn: PMP120, ean: 0044761085272,

4.6 out of 5 stars with 22 reviews
The Macromatic PMP120 is a multi-detection phase monitor relay. This 8 Pin plug-in relay has an adjustable nominal voltage of 102-138V. It monitors against 5 different types of phase errors and has an output of 10A SPDT. The LED indicator changes color to show the status or specify a particular phase error. It is green when everything is normal or changes to red or amber when it detects an error. The diagram on top of the unit shows how the LED will display an error. The PMP120 uses an 8 Pin 701


Macromatic ARP024A6 SPDT 24V Duplexor Alternating Relay, No Switch
By Macromatic
In Stock
$117.00

mpn: ARP024A6, ean: 0044761084428,

4.0 out of 5 stars with 32 reviews
The Macromatic ARP024A6 is an 8 Pin plug-in alternating relay compatible a control voltage of 24V and an output of 10A SPDT. This duplexor relay is used in applications where the run time of two loads has to be balanced. It can be used compatible one or two control switches, which start the alternating action. The output contacts on the relay change state when the initiating switch opens, so the loads alternate. The ARP024A6 features 2 LEDs that show which load energizes next. It uses an 8 pin 7


Macromatic TD-80222-41 1-1023 Sec On Delay 120V Time Delay Relay
By Macromatic
In Stock
$105.76

mpn: TD-80222-41, ean: 0044761083841,

4.2 out of 5 stars with 18 reviews
The Macromatic TD-80222-41 is an On Delay Time Delay Relay. This programmable plug-in relay has an input voltage of 120V AC/DC at 50/60Hz and 10A DPDT output contacts. The timing ranges are digitally selected by 10 position binary DIP switch, from 1 to 1023 seconds. The TD-80222-41 uses an 8 pin 70169-D octal socket. It features an LED indicator to show the current status of the relay. It shows green when the power is on, and red once the relay is energized. Crosses compatible SSAC Symcom TDM120


Macromatic TCP2G250 Over Temperature & Seal Leak Relay, 120V, 1K to 250K
By Macromatic
In Stock
$106.54

mpn: TCP2G250, ean: 0044761083896,

4.2 out of 5 stars with 18 reviews
The Macromatic TCP2G250 is an over temperature & seal leak relay. This 11 Pin plug-in relay has an input voltage of 120V. It is made to monitor fit leaks in submersible pump seals, as well as over temperature issues. It has an output of 7A SPDT and is made fit pumps that detect leaks compatible resistance sensing. The LEDs on top of the relay indicate the status. It can connect in three different ways including one probe to ground, two probes to ground, or probe to probe. Uses 70170-D octal sock


Macromatic ARP012A3R DPDT 12V Cross Wired Duplexor Alternating Relay
By Macromatic
In Stock
$125.68

mpn: ARP012A3R, ean: 0044761084626,

4.7 out of 5 stars with 14 reviews
The Macromatic ARP012A3R is an alternating relay. This 8 Pin plug-in relay has a control voltage of 12V compatible a 10A DPDT cross wired output. This relay is used in situations where the run time of two loads needs to be equalized and when added load capacity is needed. It can be used compatible two or three control switches, which initiate the alternating action. The output contacts on the relay change state when the initiating switch opens, so the loads alternate. It uses an 8 pin 70169-D oc


Macromatic ARP120A5R DPDT 120V Cross Wired Duplexor Alternating Relay
By Macromatic
In Stock
$125.68

mpn: ARP120A5R, ean: 0044761084640,

4.7 out of 5 stars with 28 reviews
The Macromatic ARP120A5R is an alternating relay. This 8 Pin plug-in relay has a control voltage of 120V AC. It is a DPDT cross wired duplexor relay used in applications in which the run time of two loads has to be equalized and when more load capacity is necessary. It has a 10A DPDT cross wired output. It can be used compatible two or three control switches, which initiate the alternating action. The output contacts on the relay change state when the initiating switch opens, so the loads altern


Macromatic ARP240A2R DPDT 240V Duplexor Alternating Relay
By Macromatic
In Stock
$125.68

mpn: ARP240A2R, ean: 0044761084619,

4.7 out of 5 stars with 30 reviews
The Macromatic ARP240A2R is an alternating relay. This 11 Pin plug-in relay has a control voltage of 240V AC. It is a DPDT duplexor relay used in situations in which the run time of two loads has to be equalized. It has an output of 10A DPDT. It can be used compatible one or two control switches, which initiate the alternating action. The output contacts on the relay change state when the initiating switch opens, so the loads alternate. It uses an 11 pin 70170-D octal socket.Note: Image is an ap


Macromatic ARP012A5R DPDT 12V Cross Wired Duplexor Alternating Relay
By Macromatic
In Stock
$125.68

mpn: ARP012A5R, ean: 0044761084596,

4.7 out of 5 stars with 55 reviews
The Macromatic ARP012A5R is an alternating relay. This 8 Pin plug-in relay has a control voltage of 12V AC. It is a DPDT cross wired duplexor relay used in situations where the run time of two loads needs to be equalized and when added load capacity is needed. It has a 10A DPDT cross wired output. It uses an 8 pin 70169-D octal socket.Note: Image is an approximation, actual part may differ Specifications Relay Function- Alternating Relay; Control Voltage- 12V AC/DC; Output- 10A DPDT Cross Wired;


Elko CRM-2HE-UNI, 2 Function Asymmetric Cycle Timer, Independent ON and Off Delay Settings
By Elko
In Stock
$113.01

mpn: CRM-2HE-UNI, ean: 0758449164028,

4.8 out of 5 stars with 13 reviews
Elko 2 Function Asymmetric Cycle Timer, Independent ON Delay and OFF Delay Settings, Remote Time Setting compatible 2 Potentiometers, DIN Rail Mount, 0.1 Seconds to 10 Days, 16A SPDT, Universal Coil Voltage 12 - 240 VAC/VDC, compatible LEDRelays and Timers. Timing Alternating & Sequencing Relays. Elko Asymmetric Cycle Timers.


Elko CRM-81J-UNI-ZR-1M, Delay ON, 6s-1min
By Elko
In Stock
$62.42

mpn: CRM-81J-UNI-ZR-1M, ean: 0758449147069,

4.5 out of 5 stars with 22 reviews
Elko Single Function Time Delay Relays, Delay ON, 6s-1minRelays and Timers. Timing Alternating & Sequencing Relays. Modular Multi-function Time Delay.


Solid State Timer Interface Module,24V AC/DC Coil,2-240VAC Output, Multi-Function Timer (0.1s to 6h)
By FINDER
In Stock
$71.83

mpn: 38.21.0.024.8240, ean: 0758449166497,

4.8 out of 5 stars with 36 reviews
Finder Solid State Timer Interface Module, 24V AC/DC coil, LED indication, 12-240VAC Output, multi-function timer (0.1s to 6h)Relays and Timers. Timing Alternating & Sequencing Relays. Modular Multi-function Time Delay.


Macromatic ARP240A6 SPDT 240V Duplexor Alternating Relay, No Switch
By Macromatic
In Stock
$117.00

mpn: ARP240A6, ean: 0044761084435,

4.6 out of 5 stars with 27 reviews
The Macromatic ARP240A6 is an 8 Pin plug-in alternating relay compatible a control voltage of 240V and an output of 10A SPDT. It is used in applications where the run time between dual loads has to be balanced. It is compatible compatible one or two control switches, which start the alternating action. The output contacts on this duplexor relay change state when the initiating switch opens, causing the loads to alternate. The ARP240A6 includes 2 LED indicators that show which load energizes next


Macromatic ARP012A6 SPDT 12V Duplexor Alternating Relay, No Switch
By Macromatic
In Stock
$117.00

mpn: ARP012A6, ean: 0044761084411,

4.4 out of 5 stars with 47 reviews
The Macromatic ARP012A6 is an 8 Pin plug-in alternating relay compatible a control voltage of 12V and an output of 10A SPDT. This duplexor relay is used in situations where the run time of two loads needs to be equalized. It can be used compatible one or two control switches, which initiate the alternating action. The output contacts on the relay change state when the initiating switch opens, so the loads alternate. The ARP012A6 features 2 LEDs that indicate which load energizes next. It uses an


Macromatic PCP575 575V Phase Reversal Monitor Relay
By Macromatic
In Stock
$109.60

mpn: PCP575, ean: 0044761084053,

4.1 out of 5 stars with 58 reviews
The Macromatic PCP575 is a three phase monitor relay that checks fit phase reversal. This 8 pin plug in relay has a nominal voltage of 575V AC, compatible an output of 10A SPDT. The LED on top will be green if everything is functioning correctly or red if a phase reversal is detected. The diagram on top of the unit shows how the LED will indicate the current status. The PCP575 uses an 8 pin 70169-D octal socket.Note: Image is an approximation. Actual part may differ. Specifications Relay Functio


Macromatic ARP012A6R SPDT 12V Duplexor Alternating Relay
By Macromatic
In Stock
$122.88

mpn: ARP012A6R, ean: 0044761084534,

4.7 out of 5 stars with 31 reviews
The Macromatic ARP012A6R is an alternating relay. This 8 Pin plug-in relay has a control voltage of 12V compatible a 10A SPDT output. This duplexor relay is used in situations where the run time of two loads needs to be equalized. It can be used compatible one or two control switches, which initiate the alternating action. The output contacts on the relay change state when the initiating switch opens, so the loads alternate. It uses an 8 pin 70169-D octal socket.Note: Image is an approximation.


Macromatic PAP400 400V Plug-in Phase Monitor Relay
By Macromatic
In Stock
$109.60

mpn: PAP400, ean: 0044761084077,

4.0 out of 5 stars with 24 reviews
The Macromatic PAP400 is a three phase monitor relay. This 8 pin plug in relay has a nominal voltage of 400V. It monitors against phase reversal, phase loss and undervoltage compatible an output of 10A SPDT. The diagram on top of the relay depicts how the LED will indicate the current status. When everything is functioning correctly, the LED is green. When an error is detected, the LED glows or blinks red. The PAP400 uses an 8 pin 70169-D octal socket.Note: Image is an approximation. Actual part



Viewing Page 2 of 5