Gauges / Hydraulic Equipment - Page 4 - Extreame Savings! Save up to 42%

Extreame Savings! Up to 42% off on Gauges (in Hydraulic Equipment) at Servis Plumbing, Page 4 [34]. Top brands include Buffalo Backflow Test Kit, COPACHI, Enerpac, Dynamic Fluid Components, Akozon, Sea-Doo, Eaton Aeroquip, Hobart, SINOCMP, BAOSHISHAN, Hongzer, Taidda, Replaces VDO, XZT, Liberty Pneumatics, Tohnichi, OIL-RITE, & Baseline. Hurry! Limited time offers. Offers valid only while supplies last.

Buffalo Backflow Preventer Test Kit
By Buffalo Backflow Test Kit
In Stock

mpn: BBI-TK9S, ean: 0636676998701,

4.1 out of 5 stars with 60 reviews
Buffalo Backflow Presenter Test Kits is a certified portable testing device made for testing all RPZ (reduced pressure zone) back flow prevention assemblies, DCVA (double check valve assemblies) and PVB valve assemblies. Home of the 6 year warranty the best in the Back Flow Industry The Buffalo Backflow Preventer Test Kit is ready to use out of the box, with a one year free NIST traceable certification, rugged foam lined carrying case and adapters.Easier to use than the competition. 6 Year Warra

Hydraulic Pressure Test Kit 25/40/60MPa for 9000PPSI Excavator Hydraulic Pressure Test Guage Kit Working, with 3pcs Oil Gauges and Test Hose 6pcs Text Coupling Excavator Construction Machinery
In Stock

mpn: Co-0005, ean: 0612590881800,

4.9 out of 5 stars with 57 reviews
Excavator Hydraulic Pressure Test Kit Hydraulic Tester Max Work Pressure:9000PSI/600BAR/60MPa Technical Parameters Gauge: Ø63mm-25MPa/250BAR/3625PSI/250Kg/c㎡, 1 PC  Gauge: Ø63mm-40MPa/400BAR/5800PSI/400Kg/c㎡, 1 PC  Gauge: Ø63mm-60MPa/600BAR/8700PSI/600Kg/c㎡, 1 PC  Test hose: Length= 60 inches, 3 PCS  Test coupling: M10*1, 1 PCS Test coupling: M14×1.5, 1 PCS Test coupling: G1/4, 1 PCS Test coupling: R1/4, 1 PCS Test coupling: UNF7/16-20, 1 PCS Test coupling: NPT1/4-18, 1 PCS Qui

Enerpac G2517L Hydraulic Pressure Gauge with Dual 0 to 6,000 PSI and 0 to 400 Bar Range, 2-1/2"-Dia. Face, 1/4" NPTF Male, Lower-Mount Connection
By Enerpac
In Stock

mpn: G2517L, ean: 0662005222742,

4.7 out of 5 stars with 38 reviews
This Enerpac G2517L pressure gauge with 2-1/2''-dia. face displays a dual scale of 0 to 6,000 psi (pounds per square inch) and 0 to 400 bar to measure and help monitor pressure within a hydraulic system. It has a lower-mount connection with 1/4'' National Pipe Taper Fuel (NPTF) male threads. Glycerin is sealed into the gauge to provide more stable readings and better visibility than dry gauges. The safety blowout disk provides a place of failure in case of over pressurization to help protect the

0-5,000 PSI Pressure Gauge, Glycerin Filled, Back Mount, 2-1/2" Display, CF1P-350D
By Dynamic Fluid Components
In Stock

mpn: CF1P-350D,

4.1 out of 5 stars with 27 reviews
5000 PSI glycerin filled pressure gauge manufactured by Dynamic Fluid Components. This gauge is designed for center-of-the-back mounting and has 1/4'' NPTF porting. Gauge reads both PSI and BAR measurements.2 1/2'' Display Face. Glycerine Filled. 1/4'' NPT Threads Center of the back mounting. Stainless Steel Case & Bezel. Phosper Bronze Bourdon Tube.

Akozon Gauge Stainless Steel Welding Taper Feeler Gauge Ruler Hole Inspection Tool 1-15mm
By Akozon
In Stock

mpn: Akozon9e28irns4t, ean: 0794419021113,

4.5 out of 5 stars with 48 reviews
Features: This gauge is made of high quality stainless steel, durable and rust-resistant. The graduation are clearly marked for convenient reading. Simple structure, fine workmanship, convenient to use. Small size and easy to carry, you can simply keep it in your bag. Widely used for measuring inner diameter, hole size, gap size and slot size. Specification: Material: Stainless steel Feeler Gauge Measuring Range: 1~15mm Straight Ruler Measuring Range: 150mm Weight: 35g / 1.2oz (appr

New OEM Sea-Doo GTI 4-TEC 06 07 LCD Gauge Cluster 278002217 278002070
By Sea-Doo
In Stock

mpn: 278002217, ean: 0733556134676,

4.9 out of 5 stars with 35 reviews
Fits:2007 GTI 4TEC2007 GTI 4TEC RENTAL2007 GTI 4TEC SE2007 GTI 4TEC SENew OEM Sea-Doo Cadran Info Lcd Gauge. OEM Part Number: 278002217 (QTY 1). Item only fits specific models listed. The picture could be generic.. Message us with VIN/HULL for fast fitment verification.. Please Note: Sea-Doo Gauges must be installed and programmed by a certified Sea-Doo Dealership.

Eaton 1"-11-1/2 Brass Hydraulic Coupler Body, 1" Body Size - 5100-S5-16B
By Eaton Aeroquip
In Stock

mpn: 5100-S5-16B,

4.8 out of 5 stars with 30 reviews
Hydraulic Coupler Body Coupler Interchange Type 5100 Connection Type FNPT Coupler Thread Size 1 In.-11-1/2 Coupler Body Size 1 In. Coupler Flow Rate 40.0 gpm Max Pressure 3000 psi Coupler Body Material Brass Sleeve Material Steel Coupler Finish Trivalent Chromium Zinc Seal Type Captive Valve Operating Temp Range -40 Degrees to 250 Degrees F Coupler Connection Type FNPT Seal Material Buna Shut Off Double Valve Design Tubular Locking Mechanism Screw TogetherItem: Hydraulic Coupler Body. Thread Siz

Hobart 770125 Oxy/Acet,Gauge High Pressure,Psi/Apa,Lp/Acetylene
By Hobart
In Stock
You Save: 13%

mpn: 770125, ean: 0715959250283,

4.3 out of 5 stars with 49 reviews
Hobart Air/Oxygen Low Pressure Gauge 770128High Pressure Gauge. Made by Smith. Feature dual scales..

SINOCMP 203-60-31160 Fuel Level Gauge Oil Meter for Komatsu PC120-5 PC200-5 PC200-6 PC200-7 PC200-8 Excavator Hydraulic Level Gauge, 3 Month Warranty
In Stock

mpn: CP-K6000,

4.5 out of 5 stars with 43 reviews
SINOCMP 203-60-31160 Hydraulic Fuel Level Gauge Oil Gauge for Komatsu PC120-5 PC200-5 PC200-6 PC200-7 PC200-8 Excavator Parts Product Specification: • Part Name: 203-60-31160 Hydraulic Fuel Level Gauge, 203-60-31160 Oil Gauge, 203-60-31160 Oil Meter • Model Number: PC120-5 PC200-5 PC200-6 PC200-7 PC200-8 • Part Name: Excavator Hydraulic Fuel Level Gauge Oil Gauge Oil Meter • Warranty: 3 Month • Wire and electrical parts are very easy to short circuit, which will lead to the damage of

BAOSHISHAN DL-100 Push Pull Force Gauge Force Gauge Tester for Tension and Compression Load, Plug Force, Destructive Test (up to 100 lbs)
In Stock

mpn: M-292, ean: 6013040050052,

4.2 out of 5 stars with 23 reviews
The product usually takes 7--13 business days to arrive to your hand after your order is confirmed Specifications: DL Series Analog Force Gauge is a small simple thrust, tensile testing equipment, with sophisticated design, easy to carry, peak hold two units at the same time show the advantages. Widely used in high and low voltage electrical appliances, electronics, wire, hardware lock, auto parts, lighters and ignition devices, pens, light industry, construction, fishing, textiles, chemical

Hydraulic Pressure Test, Heat Pressure Resistance Excavator Hydraulic Pressure Test Kit with Testing Point Coupling and Gauge
By Hongzer
In Stock

mpn: Hongzerg18ptyiu6h, ean: 0765614020492,

4.9 out of 5 stars with 55 reviews
Features: 100% brand new and high quality This kit is used for construction machinery excavator hydraulic pressure test. The excavator hydraulic pressure test kit contains test point coupling, pressure gauge, test hose The pressure measuring hose has the characteristics of heat resistance, pressure resistance. With a box for protection of the test tool and convenient to store. Specification: Pressure gauge: Dia.63mm-25Mpa(250bar / 3600psi) Pressure gauge:Dia.63mm-40Mpa(400bar / 5800psi)

Hydraulic Hose Test Point Coupling, M162-BSP1/4 + 0~250BAR/3600PSI Gauge with 1.5 Meter Hose Hydraulic Pressure Gauge kit
By Taidda
In Stock
You Save: 4%

mpn: Taiddamg1g2x5hea, ean: 0791655576339,

4.0 out of 5 stars with 58 reviews
Features:This hose gauge kit is designed for testing pressure in a hydraulic system This hydraulic hose has the characteristic of heat resistance, chemical resistance, acid resistance and solvents Strong environmental adaptability: ozone resistance, UV resistance, adaptation to climate change, no moisture absorption. With advanced structure, reliable sealing, small size, light weight and easy to use. Because the inner wall is smooth, the flow resistance is very small. Specification: Hose leng

VDO Engine Oil Pressure Sensor Sender Switch 0-150PSI 12-24VDC 1/8NPT
By Replaces VDO
In Stock
4.8 out of 5 stars with 23 reviews
REPLACES OEM# - 0-150PSI. | | | SPECIFICATIONS - Range of measurement: 0-150psi, Alarm Pressure: 0.15±0.02 Mpa, Rated Power:0.5W, Operation Temperature: -25°~100°, Over Pressure Safety:1.5MPa.Range of measurement: 0-150 PSI (Pounds per Square Inch). Alarm Pressure: 0.15±0.02 MPa (megapascal). Operation Temperature: -25°~100°. Rated Power: 0.5W. Over Pressure Safety: 1.5MPa.

XZT 70P Digital Hydraulic Pressure Test Coupling Kit for Caterpillar CASE Komatsu Excavator Construction Machinery
In Stock

mpn: XZTK-70MD, ean: 0603097853179,

4.7 out of 5 stars with 37 reviews
Max Work Pressure:10000PSI/700BAR/70MPa Contain: Description ---------------- Quantity: PCS Pressure Gauge Gauge: Ø80mm-700BAR/10000PSI/70MPa--------2 Gauge: Ø80mm-160BAR/2300PSI/16MPa--------1 Test Hose Assembly Test hose: Length=1.5m-------------------2 Test hose: Length=3.0m-------------------1 Test Coupling Test coupling: G1/8----------------- 2 Test coupling: G1/4------------------ 2 Test coupling: G3/8----------------- 1 Test coupling: M8*1----------------- 1 Test coupling: M10*1

XZT 3.15" Digital Hydraulic Pressure Gauge 0~6000PSI/400BAR-1/4NPT-base Entry
In Stock
You Save: 42%

mpn: Digi Gauge-80mm-400BAR-1/4NPT, ean: 0600748681051,

4.1 out of 5 stars with 56 reviews
Specification: Pressure Range: 0-6000PSI/400BAR/40Mpa; Pressure Connection: NPT1/4; Display Unit: Bar, PSI ,MPa, Kgf/cm2; Overload Capacity: 150%; Accuracy: 0.5%FS; Long-term Stability: 0.4%FS/year; Input Voltage: 3V (two 1.5V AAA batteries); Working Temperature: -20C-70C; Footer Material and Pressure Connection: 304 Stainless Steel; Protection Class: IP65 Thickness: 46mm(18.1inch); Outline Dimension: 80mm(31.5inch); Length:120mm(47.2inch). Features: Button Description: Power button: press powe

Hydraulic Liquid Filled Pressure Gauge 0-100 PSI 1/4" NPT Center Back Mount
By Liberty Pneumatics
In Stock

mpn: LS025-100,

4.6 out of 5 stars with 19 reviews
New In the Box Hydraulic Liquid Filled Pressure GaugeSpecifications:Case: Stainless Steel Ring: Stainless Steel Connection: Brass 1/4 NPT Male CBM 2 1/2'' Face Pressure Range 0-100 PSIG Great for measuring any fluid, liquid or gas that is compatible with Brass. Thank you for your business!! Check out my other items!

BAOSHISHAN Spring Push Pull Force Gauge Tension Gauge (G) (TK-2000G=2KG)
In Stock

mpn: ZQ-643D,

4.9 out of 5 stars with 19 reviews
The product usually takes 6--10 business days to arrive to your hand after your order is confirmed NOTE: We will send the product to you as soon as possible If you have any questions , please feel free to contact usDividing value: 50G; Length: 240mm; Range: 2000G. Measures tensile (pull) or compression (push) forces. Analog gauge shows measurements in grams (g). Measures present force with a measurement accuracy of + or - 1 graduation.

Tohnichi Torque Gauge 300ATG-S (30~300
By Tohnichi
In Stock

mpn: 300ATG-S, ean: 4560138457221,

4.4 out of 5 stars with 8 reviews
Tohnichi Analog Torque GaugeTorque Range: 30~300 Accuracy +/-2% of reading. CW & CCW testing with top and side memory pointers. Three fingered keyless metal chuck. Includes Certificate of Calibration and Plastic Storage Case.

A2890-17, Fused Window Sight, With Reflector, 2" Hex, 1 1/2" NPT - qty. 2
In Stock

mpn: A2890-17,

4.2 out of 5 stars with 16 reviews
Qty. 2 sights included in this listing. Fused Window Sights allow visual observation of liquid levels and their condition. They can be used to display fluid motion or mechanical movements, as well as to view and perform tests in a safe enclosure. Specific uses include fluid sighting on hydraulic tanks, pressure vessels, reservoirs, packaged power equipment, hydraulic lines and dipping. Their use can be applied to any application where oil or fluid inspection is essential. Two or more sights can

Baseline dolorimeter (2 pound sensitivity)
By Baseline
In Stock

mpn: 12-1440,

4.9 out of 5 stars with 29 reviews
Baseline dolorimeter (2 pound sensitivity) Evaluate pain threshold. Standardized (1.52cm2) flat circular probe is pushed against subjects skin until pain threshold is reached. Pounds and kilograms. Product photo may not exactly match the product offered for sale. Please refer to the product description.

Viewing Page 4 of 5

Browse Our Catalog

Privacy Policy / Terms of Service / Accessibility Statement
© 2020 - All Rights Reserved.