Fittings / Hydraulic Equipment - Page 2 - Blowout Sale! Save up to 65%


Blowout Sale! Up to 65% off on Fittings (in Hydraulic Equipment) at Servis Plumbing, Page 2 [37]. Top brands include DERNORD, utah pneumatic, QiiMii, Legines, HFS, & Apache. Hurry! Limited time offers. Offers valid only while supplies last.



DERNORD Silicone Gasket Tri-Clover (Tri-clamp) O-Ring - 2 Inch (Pack of 5)
By DERNORD
In Stock
$11.99

mpn: DERNORD-75-5, ean: 0713893174467,

4.3 out of 5 stars with 21 reviews
Fit for : 2'' Tri-Clamp Apply to Pipe Outer Dia : 51mm / 2'' Inner Hole Dia(Approx) : 48mm / 1.89'' Outer Dia : 64mm / 2.5'' Thickness (Max.) : 4.8mm / 0.19'' This quality silicone gaskets are great replacements if your gaskets break on your blades, and this silicone gasket offers a stable isolation performance even at a extremely natural conditions.Silicone gasket fit standard 2'' tri-clover or tri-clamp fittings, apply to Pipe Outer Dia: 51mm / 2''. Outer Diameter : 64mm / 2.5''. Inner Ho


Utah Pneumatic Push to Connect Fittings Nickel-Plated Brass Pc Male Straight 1/4"Od 1/4"Npt Thread Straight Connect Push Fit Fittings Tube Fittings Pneumatic Fittings 5 Pack (1/4od1/4Npt Brass pc)
By utah pneumatic
In Stock
$19.70
$17.90
You Save: 9%

mpn: will, ean: 0652827872300,

4.5 out of 5 stars with 8 reviews
CAUTION 1.The tube connectors are primarily made for air and water . Other fluid types are highly prohibited. 2. The use of pneumatic connector is limited to areas that are highly prone to fire outrage 3. Don't use the connections in areas whose water temperature is above 120'C 4. To avoid leakages and damage,you're advised to resist the temptation of adding extra loads to the push connectors USER GUIDE Carefully examine the tube connectors ends for a right angle cutting. Don't also forget to


DERNORD Sanitary Spool Tube with Clamp Ends,Stainless Steel 304 Seamless Round Tubing with 1.5 inch Tri Clamp 50.5MM Ferrule Flange (Tube Length: 24 Inch / 610MM)
By DERNORD
In Stock
$26.69

mpn: DERNORD-206, ean: 0717643522669,

4.0 out of 5 stars with 39 reviews
From the Manufacturer This Dernord Sanitary spools which are made of stainless steel 304 are prefabricated lengths of tubing with Tri Clamp fitting ends added for convenience. When combined with other Tri Clamp fittings, clamps, and gaskets, sanitary spools can build a process line without the need for on-site welding and fabrication, and at a considerable time savings. Tri Clamp spools also have the added benefit of being less permanent than welded tubing, and can be easily disassembled, moved,


DERNORD PTFE (Teflon) Tri-Clamp Gasket O-Ring - 1.5 Inch Style Fits OD 50.5MM Sanitary Pipe Weld Ferrule (Pack of 10)
By DERNORD
In Stock
$10.99

mpn: DERNORD-406, ean: 0689771291482,

4.3 out of 5 stars with 10 reviews
Fit for : 1.5''Tri-Clamp Apply to Pipe Outer Dia : 38mm / 1.5'' Inner Hole Dia(Approx) : 34mm / 1.34'' Outer Dia : 50.5mm / 2'' Thickness (Max.) : 4.8mm / 0.19'' This quality Teflon gaskets are great replacements if your gaskets break on your blades, and this Teflon gasket offers a stable isolation performance even at a extremely natural conditions.Teflon gasket fit standard 1.5'' tri-clover or tri-clamp fittings, apply to Pipe Outer Dia: 38mm / 1.5''. Outer Diameter : 50.5mm / 2''. Inner H


DERNORD Tri-clamp Stainless Steel 304 Single Pin Heavy Duty Tri Clamp with Wing Nut for Ferrule TC with 1 pc Silicone Gasket (1.5" Tri-clamp+Silicone Gasket) (1.5 Inch Tri clamp Size: 2 Pack)
By DERNORD
In Stock
$11.95

mpn: DERNORD-675,

4.2 out of 5 stars with 56 reviews
1.5 Inch tri-clover clamp (tri-clamp):Stainless steel 304 Single pin heavy duty clamp with cross hole wing nut. NOTE: Pipe and tube fittings are components used for connecting, terminating, controlling flow, and changing the direction of piping in many different industries. Sanitary fittings are used in the food, beverage, biotech, pharmaceutical, and other sanitary process industries to transport fluids through pipe lines and are available in a range of materials, finishes, and shapes. When


1.5" Tri Clamp Tri Clover Fittings to NPT (3/4") Male Thread Adaptor SS304
By QiiMii
In Stock
$12.99

mpn: FLM0220754, ean: 0708210460583,

4.4 out of 5 stars with 35 reviews
Used to Pipe connection Body material:Stainless Steel 304 High Pressure Durable Pipe Size: 1/2'' Ferrule Size: fits 1.5'' Tri-clamp. Suitable for use in food, beverage, and dairy applications.CNC Machine. Ferrule Size: 50.5mm, and fits 1.5'' Tri-clamp. Connection:3/4'' NPT. Fits: 1.5'' Tri Clamp / Clover / Sanitary Fitting. Made of stainless steel 304.


DERNORD Stainless Steel Sanitary Clamp Single Pin Tri Clamps Clover (Tube OD: 3")
By DERNORD
In Stock
$13.99

mpn: DERNORD-122, ean: 0603894721725,

4.6 out of 5 stars with 47 reviews
3 inch tri-clover clamp (tri-clamp):Stainless steel 304 Single pin heavy duty clamp with cross hole wing nut. NOTE: Pipe and tube fittings are components used for connecting, terminating, controlling flow, and changing the direction of piping in many different industries. Sanitary fittings are used in the food, beverage, biotech, pharmaceutical, and other sanitary process industries to transport fluids through pipe lines and are available in a range of materials, finishes, and shapes. When pu


DERNORD 2" Tube OD Sanitary Ferrule Elbow 90 Degree Pipe Fitting SUS304 Tri Clamp 2 Inch
By DERNORD
In Stock
$42.99
$14.99
You Save: 65%

mpn: DNJF1501117-3, ean: 0611801475807,

4.9 out of 5 stars with 41 reviews
DERNORD series 90-degree clamp elbow sanitary fitting is made of stainless steel 304 and clamps onto tubing at both ends. This elbow fitting, also called an ''ell,'' connects tubes at a 90-degree angle to change the direction of flow between pipes or tubes, providing a non-permanent seal with take-down access. NOTE: Pipe and tube fittings are components used for connecting, terminating, controlling flow, and changing the direction of piping in many different industries. Sanitary fittings are


DERNORD Teflon (PTFE) Tri-Clamp Gasket O-Ring - 4 Inch Style Fits OD 119MM Sanitary Pipe Weld Ferrule (Pack of 5)
By DERNORD
In Stock
$19.99
$12.59
You Save: 37%

mpn: DERNORD-418,

4.4 out of 5 stars with 40 reviews
Fit for : 4'' Tri-Clamp Apply to Pipe Outer Dia : 102mm / 4'' Inner Hole Dia(Approx) : 98mm / 3.8'' Outer Dia : 119mm / 4.6'' Thickness (Max.) : 4.8mm / 0.19'' This quality Teflon gaskets are great replacements if your gaskets break on your blades, and this Teflon gasket offers a stable isolation performance even at a extremely natural conditions.Teflon gasket fit standard 4'' tri-clover or tri-clamp fittings, apply to Pipe Outer Dia: 102mm / 4''. Outer Diameter : 119mm / 4.6''. Inner Hole


DERNORD Stainless Steel 304 Single Pin Heavy Duty Tri Clamp with Wing Nut for Ferrule TC 2'' (Pack of 2)
By DERNORD
In Stock
$15.99

mpn: DERNORD-473, ean: 0698253849370,

4.0 out of 5 stars with 19 reviews
2 inch tri-clover clamp (tri-clamp):Stainless steel 304 Single pin heavy duty clamp with cross hole wing nut. NOTE: Pipe and tube fittings are components used for connecting, terminating, controlling flow, and changing the direction of piping in many different industries. Sanitary fittings are used in the food, beverage, biotech, pharmaceutical, and other sanitary process industries to transport fluids through pipe lines and are available in a range of materials, finishes, and shapes. When pu


DERNORD 45 Degree Elbow | 1.5" Tube OD Stainless Steel 304 Pipe Fitting Fits Tri Clamp 1.5 inch
By DERNORD
In Stock
$20.99
$12.99
You Save: 38%

mpn: DERNORD-486, ean: 0698253849257,

4.6 out of 5 stars with 16 reviews
DERNORD series 45-degree clamp elbow sanitary fitting is made of stainless steel 304 and clamps onto tubing at both ends. This elbow fitting, also called an ''ell,'' connects tubes at a 45-degree angle to change the direction of flow between pipes or tubes, providing a non-permanent seal with take-down access. NOTE: Pipe and tube fittings are components used for connecting, terminating, controlling flow, and changing the direction of piping in many different industries. Sanitary fittings are


Legines Copper Flare Gasket, 45 Degree, Flare Fitting (1/4" Tube OD, Pack of 10)
By Legines
In Stock
$11.99

ean: 6627145147939,

4.1 out of 5 stars with 52 reviews
The product is flare gasket, 45 degree copper flare fitting, 3/16 1/4 5/16 3/8 1/2 5/8 3/4 inch tube size. It features U.L. Listed for Flammable liquids, economical, use with copper, Brass, aluminum and welded steel hydraulic tubing that can be Flared and metal-to-metal seal.U.L. Listed for flammable liquids. Feature: economical. Use with chopper, brass, aluminum and welded steel hydraulic tubing that can be flared. Metal-to-metal seal. Functional requirements of sea J512 & sea J513.


HFS(R) Hydraulic Grease Fitting SAE Standard 110-Piece Kit - Straight, 90-Degree, 45-Degree Angled Zerk Assortment Set
By HFS
In Stock
$12.50

ean: 0688949765459,

4.3 out of 5 stars with 46 reviews
Includes commonly used zerk/grease SAE fittings. 1/4''-28 straight 180-degrees 30pcs, 1/4''-28 45-degrees 15pcs,. 1/4''-28 90-degrees 15pcs, 1/8''-27 90-degrees 15pcs,. 1/8''-27 45-degrees 15pcs, 1/8''-27 straight 180-degrees 20pcs.


DERNORD Tri Clamp Filter Plate - High Pressure Sanitary Fitting with 6mm Holes (1.5" Tri Clamp Size)
By DERNORD
In Stock
$15.99

mpn: DERNORD-532,

4.1 out of 5 stars with 9 reviews
From the Manufacturer DERNORD Stainless steel tri-clamp filter plates offer the user a great solid platform to help with filtration during the extraction process and they come standard with tri clamp screen gaskets available in different sizes and material types.These filter plates can be used simultaneously with ashless filter papers or any other filtration media like stainless steel ball bearings or steel wool to increase surface and filtration level to remove fats, lipids, waxes and any other


Utah Pneumatic 5 pack Plastic Push To Connect Fittings Tube Straight Connect 1/2 inch od Push Fit Fittings Tube Fittings Push Fit (1/2"Straight)
By utah pneumatic
In Stock
$24.80
$15.60
You Save: 37%

mpn: st120000, ean: 0650966585396,

4.5 out of 5 stars with 28 reviews
Utah Pneumatic Fittings are a compact one piece push-to-connect fitting. All items in the Utah Pneumatic composite range are silicone free. The Stainless steel gripping ring ensures excellent tube retention while the D seal within the fitting provides a positive seal on the O.D. of the tube, in both static and dynamic positions, due to an optimized design of the fitting cavity. Utah Pneumatic composite should not be used for live swivel applications. Body and collar are made of Nylon 6.6, grippi


DERNORD Sanitary Clamp High Pressure Bolted Tri Clamp Clover Stainless Steel 304 (Tri-clamp: 3 Inch)
By DERNORD
In Stock
$15.99

mpn: DERNORD-490, ean: 0698253849219,

4.3 out of 5 stars with 9 reviews
DERNORD High Pressure Clamps are constructed from 304 stainless steel and intended for use with sanitary Tri-Clamp fitting connections. Bolted double pin high pressure clamps are a significant upgrade from the standard clamp, with the ability to withstand twice the pressure of comparable sized single or double hinged clamps. High pressure bolted clamps are available in stainless steel SS304, with sizes ranging from 3/4 inch up to 12 inches. Larger sizes are available by special order. Intended f


Utah Pneumatic Push to Connect Tube Fitting, Bulkhead Union - 1/4" Tube OD X 1/4" Tube OD (5 Pack)
By utah pneumatic
In Stock
$15.90

ean: 0662187377872,

4.3 out of 5 stars with 50 reviews
Utah Pneumatic Fittings are a compact one piece push-to-connect fitting. All items in the Utah Pneumatic composite range are silicone free. The Stainless steel gripping ring ensures excellent tube retention while the D seal within the fitting provides a positive seal on the O.D. of the tube, in both static and dynamic positions, due to an optimized design of the fitting cavity. Utah Pneumatic composite should not be used for live swivel applications. Body and collar are made of Nylon 6.6, grippi


Stainless Steel 304 Rotary Tank Spray Cleaning Ball 1/2" Female Connection with Ball Dia 40mm and Cleaning Radius 0.5-1.5m
By QiiMii
In Stock
$18.99

mpn: TCR0141050, ean: 0611677856595,

4.4 out of 5 stars with 33 reviews
Outside Surface Finish: Mirror PolishingMaterial: Stainless Steel 304. Connection: 0.5'' Female Thread.. Standard: BSP, Suit NPT as well Ball Dia: 40mm. Working Pressure: 1-2 bar Cleaning Radius:0.5-1.5m.


DERNORD Silicone Gasket Tri-Clover (Tri-clamp) O-Ring Pack of 20 (1.5" Tri clamp Size: OD: 50.5mm, ID: 34mm)
By DERNORD
In Stock
$11.99

mpn: DERNORD-671,

4.8 out of 5 stars with 38 reviews
Fit for : 1.5'' Tri-Clamp Apply to Pipe Outer Dia : 38mm / 1.5'' Inner Hole Dia(Approx) : 34mm / 1.34'' Outer Dia : 50.5mm / 2'' Thickness (Max.) : 4.8mm / 0.19'' This quality silicone gaskets are great replacements if your gaskets break on your blades, and this silicone gasket offers a stable isolation performance even at a extremely natural conditions.Silicone gasket fit standard 1.5'' tri-clover or tri-clamp fittings, apply to Pipe Outer Dia: 38mm / 1.5''. Outer Diameter : 50.5mm / 2''.


Apache 39035404 1/4" Female Pipe x 1/4" Female Pipe Hydraulic Adapter (Style 5000)
By Apache
In Stock
$10.02

mpn: 39035404, ean: 0725559053962,

4.7 out of 5 stars with 30 reviews
A heavy-duty hydraulic hose adapter that has a 1/4'' female thread fitting on each end. Use to connect two male standard pipe threads of 1/4'' size.Solid construction for long life. Connects two male pipe thread hoses together. Metal-on-metal connection. Easy to install.



Viewing Page 2 of 5

Browse Our Catalog