Flow Switches / Fittings - On Sale Now! Save up to 7%

Gems Nylon float single point level switch with type 7 internal mounting. Ls-7 series compact side mounts are the solution to many small tanks. These low-cost units are ideal for high volume use in small tanks and vessels. Engineered plastics construction offers broad compatibility in water, oils and chemicals. Switch rating: SPST, 20VA. Lead wire gauge: No. 22 AWG. Mounting attitude: Horizontal. Switch operation: Depending on the mounting position, the float on these switches can rise or lower

The new Maxim snow plow 12V DC power unit was designed to improve the functionality of power-angle snow plows. The new circuit design eliminates ''Blade Creep'' during angle adjustment of the blade. The unit includes a lift-hold-gravity lower function for the blade, with a continuous ''float'' feature for improved contact with the road. The system is protected with two-crossover relief valves set at 1,500 psi should the blade come into contact with an object during plowing. Has a 20 ft. pre-wire

This float switch mounting bracket is made of high quality transparent PC material, high hardness, durable and solid, no breaking. It has two installation methods for you to choose (please refer to the picture). Adjustable clip design, easy to adjust up and down, widely used for fish tanks, aquariums , saltwater tank, freshwater tank, etc. Specifications: Material: PC Mounting slot diameter: 10.13mm (0.40 inch) and 16.13mm (0.63 inch) Overall height: 13cm (5.11 inch) Max work with 5/8''(16mm) th

Gems Adaptor kit required for use with 3E, 3F and 3N fittings.Adaptor kit. For 3E, 3F and 3N fittings.

FS-500 Series - Low Cost Units for Threaded Plastic Piping. The FS-500 offers low cost flow monitoring with a variety of switch actuation points and low pressure drop. All wetted parts are polypropylene or stainless steel, making this switch ideal for a wide range of chemical and temperature requirements. The materials are also NSF or FDA approved for potable water treatment applications including chlorinators, purifiers and heaters. The FS-500 is ideal for equipment cooling including welders, l

Product Features: Product Name : Water Level Sensor;Contacts : NO+NC;Max Contact Rating : Max Contact Rating:10WMax Contact Rating :10W;Max Switching Voltage :100V AC/DC;Max Switching Current :0.5A; Max Breakdown Voltage: 110V AC/DC; Max Carry Current :1.0AMax Contact Resistance:100M¦¸;Temperature Rating: -30~+125 degree centigrade;Max Load Pressure: 0.2MPA;Net weight:56gInstallation: top or bottom mounted vertically ; Use medium: water, oil, chemical medium Product Specification: A float swit

Designed to provide an inexpensive, reliable unit to monitor the presence or absence of flow in a system. The V10 flow switch is used to monitor unattended equipment and protect it from costly damage. The V10 flow switch utilizes a rugged, hermetically sealed reed switch which is encapsulated in a polypropylene switch housing that fits into a standard heavy duty leak proof brass body or optional 303 Stainless Steel body. The switch adjustment allows the user to change the switch to Normally Open

60002 The Cim-Tek Locking Pre-Vent pressure cap is a original patent design for use on small above ground farm tanks, commercial gasoline tanks, distillate tanks, fuel transfer tanks, small oil storage tanks, and industrial oil transfer tanks. The Pre-Vent helps to maintain fuel quality by reducing condensation and evaporation loss. It's designed to divert rain and condensation away from the fill hole.Fits 2'' NPT Opening. Powder Coated Finish. Maintain Fuel Quality.

Used for starting or stopping electrically operated equipment such as signal lights, alarms, motors, automatic burners and metering devices. 1'' NPT connection, single pole, double throw switching. Sealed Monel Bellow. Two electrical knock-outs allows connection from either end. Four stainless steel paddles included: 1'', 2'', 3'' & 6''. **This product is prohibited from shipping to California.**, Lot of 1For starting or stopping electrically operated equipment such as signal lights, alarms, mot

The General Pump 100975 is a Flow Switch. It has an operating gpm of 12.0 and a psi of 5,000. Some features include: Micro-switch technology eliminates reed switch; activities with as little as .5 gym flow; minimal pressure drop up to 12 gym flow; mount in vertical position.Max Switch Voltage: 250 VAC. Max Switching Current: 5 AMPS. Resistance with Leads: 30 OHM. Electrical Service Life: 200,000 Cycles. Mechanical Service Life: 10,000,000 Cycles.

BALLUFF BES 516-300-S322-S4-D（BHS004P） Inductive Standard Sensors PNP New Dimension Ø 12 x 56 mm Style M12x1 Installation for flush mounting Range 1.5 mm Switching output PNP Normally open (NO) Switching frequency 1000 Hz Housing material Stainless steel (1.4104) Material sensing surface EP Connection Connector, M12x1-Male, 4-pin Operating voltage Ub 10...30 VDC Ambient temperature -25...80 °C Pressure rating max. 350 bar IP rating IP68 Approval/Conformity CE, EAC, WEEECarus

Product Features: Product Name : Water Level Sensor;Contacts : NO+NC;Max Contact Rating :10W;Max Switching Voltage :100V AC/DC;Max Switching Current :0.5A;Max Load Current:1.0A; Max Breakdown Voltage: 110V AC/DC; Max Carry Current :1.0AMax Contact Resistance:100M¦¸;Temperature Rating: -30~+125 degree centigrade;Max Load Pressure: 0.2MPA;Net weight:43gInstallation: top or bottom mounted vertically ; Use medium: water, oil, chemical medium Product Specification: A float switch is a device used t

Gems Warrick liquid level sensors are available in four probe models. The versatility of the Warrick design makes these sensors ideal for a diverse range of applications. It includes food and beverage, pharmaceuticals, caustics and acids, boilers and steam generators, sumps, ponds, reservoirs, sewage and wastewater. These Warrick fitting are designed for OEM use. Series 3E fittings are cast metal, pressure-tight assemblies capable of handling 4 probes. Attachment to vessels is accomplished with

Gems intrinsically Safe-Pak electronic relay. Less than 100 microamps at 9 VDC actuates the unit to control loads to 5A at 120 VAC. Resistive up to 100000 ohm or short-circuiting sensors operate the unit. Operating temperature range: 0 to +120 degree F. 5A load current maximum. 400 K Turn-on sensitivity (typical). 1 M turn-off sensitivity (typical). 2 VAC voltage loss. Maximum output leakage current: 6 mA at 120 VAC. SPST N.O. switching operation. Approvals: UL, CSA. 3'' height.Intrinsically Saf

Mini stainless steel float switch,contains no mercury Float switch is a device used to sense the level of liquid within a tank. The switch may actuate a pump, an indicator, an alarm, or other device.It can be easily converted from normally open to normally close by inverting the float. Specification: ◎Product Name : Floating Switch ◎Model No. :EP18010-2 ◎Max Contact Rating: 10W ◎Max Switching Voltage : 100VDC ◎Max Switching Current : 0.5A ◎Max Breakdown Voltage : 220VDC ◎Max Load C

This water flow switch features high temperature resistant, high sensitivity and safe to use.  It is widely applicable to increase water pressure in low water pressure area, especially for low water pressure of shower or automatic cycle of solar water heater.Water Flow Switch adopts a Magnetic Reed Switch, G 3/4;male threaded ports each end. Equipped with filter water entry. Mainly used for water heater, boiler, water dispensers, coffee machines, hot card machines, steam equipment, water system

Gems Warrick liquid level sensors are available in single probe models. The versatility of the Warrick design makes these sensors ideal for a diverse range of applications. It includes food and beverage, pharmaceuticals, caustics and acids, boilers and steam generators, sumps, ponds, reservoirs, sewage and wastewater. These Warrick fitting are designed for OEM use. Series 3E fittings are cast metal, pressure-tight assemblies capable of handling 1 probes. Attachment to vessels is accomplished wit

Gems Warrick liquid level sensors are available in seven probe models. The versatility of the Warrick design makes these sensors ideal for a diverse range of applications. Its includes: Food and beverage, pharmaceuticals, caustics and acids, boilers and steam generators, sumps, ponds, reservoirs, sewage and wastewater. These Warrick fitting are designed for OEM use. Series 3B fittings are compact pressure tight assemblies that hold a single electrode probe for use in water and chemicals. These f

Gems single point level switch with brass stem and mounting. Rugged durability. Broad heat and pressure capabilities. Ideal for shallow tanks or restricted spaces, or for low-cost, high volume use. Offer broad chemical compatibility for general purpose use. Ideal for oils and water. 0.45 Minimum liquid SG. Operating temperature for water is up to 180 degree F and for oil is -40 to 300 degree F. 300 psi maximum pressure. 20 VA switch. Electrical termination: No. 22 AWG, 24'' L, polymeric lead wir

Style R oil hole covers press fit into a drilled hole. Slightly tapered shank assures snug fit, shoulder provides for insertion to a predetermined depth so that cover may be driven in without danger of cracking castings. Made of steel. Zinc plated finish.Style R oil hole covers press fit into a drilled hole. Slightly tapered shank assures snug fit. Shoulder provides for insertion to a predetermined depth so that cover may be driven in without danger of cracking castings. Made of steel. Zinc plat