Threaded Tube Fittings / Tube Fittings - Page 3 - Extreame Savings! Save up to 50%


Extreame Savings! Up to 50% off on Threaded Tube Fittings (in Tube Fittings) at Servis Plumbing, Page 3 [87]. Top brands include uxcell, Colder Products Company, John Guest, Brennan Industries, LASCO, K&S, Zivisk, legines, Sydien, Swagelok, Parker, Weatherhead, & Parker Hannifin. Hurry! Limited time offers. Offers valid only while supplies last.



uxcell 20 Pcs 1/4PT Male Thread to 8mm Pneumatic Push in Quick Joint Fittings
By uxcell
In Stock
$13.99

mpn: a14082900ux0647, ean: 0702105959558,

4.1 out of 5 stars with 13 reviews
Designed for Polyurethane or Nylon tubing. Made from solid brass for corrosion resistance. Even after installation, the direction of the tube can be changed freely. Elliptical release ring help to connect tube easily by manual, no special tools required. Outside (and Inside where applicable) hexagonal wrench tightening. This Quick fittings are only used for industrial automatic apparatus and can not be applied on any medicinal equipment.Item Name : Quick Fittings;Material : Metal, Plastic. Color


Colder PLCD22004 Acetal Tube Fitting, Insert, Shutoff, In-Line, 1/4" Insert x 1/4"Barb
By Colder Products Company
In Stock
$14.99

mpn: PLCD22004,

4.0 out of 5 stars with 47 reviews
This Colder shutoff in-line tube fitting is made of acetal copolymer and has insert and barbed connectors. This insert coupler fitting connects two pipes going in the same direction to extend a straight run. It has a coupler on one end and barbed construction on the other for connecting two pipes or tubes with different ends. The fitting is made of acetal copolymer plastic, which has low moisture absorption, high tensile and flexural strength, and is hard and fatigue resistant. The working press


John Guest Acetal Copolymer Push-To-Connect Tube Fitting, Reducing Branch Tee, 1/2" x 3/8" x 1/2" Tube OD (Pack of 10)
By John Guest
In Stock
$53.70
$40.72
You Save: 24%

mpn: PI301612S, ean: 0665626055317,

4.8 out of 5 stars with 51 reviews
This John Guest reducing branch tee fitting is made of acetal copolymer and has tube connectors. This reducing branch tee fitting connects three pipes with different diameters in a main/brain configuration to reduce the flow of the piping system. It is a push-to-connect fitting that accepts the insertion of nylon, soft nylon and polyurethane tube fittings. The fitting is made of acetal copolymer plastic, which has low moisture absorption, high tensile and flexural strength, and is hard and fatig


Brennan Industries 5602-02-02-04-FG Forged Steel Street Tee Tube Fitting, 1/8"-27 NPTF x 1/8"-27 NPTF x 1/4"-18 NPTF Thread, 1/8" Male NPTF x 1/8" Female NPTF x 1/8" Female NPTF
By Brennan Industries
In Stock
$11.84

mpn: 5602-02-02-04-FG,

4.2 out of 5 stars with 14 reviews
Brennan Industries 5602-02-02-04-FG Forged Steel Street Tee Tube Fitting, 1/8''-27 NPTF x 1/8''-27 NPTF x 1/4''-18 NPTF x Thread, 1/8'' Male NPTF x 1/8'' Female NPTF x 1/8'' Female NPTF.Made of forged steel. 1/8'' Male NPTF x 1/8'' Female NPTF x 1/8'' Female NPTF. Made in USA.


LASCO 19-6065 Tubing Reducing Coupling Push-in Fitting with 3/8-Inch x 1/4-Inch OD, Plastic
By LASCO
In Stock
$11.02

mpn: 19-6065, ean: 0052151279996,

4.4 out of 5 stars with 54 reviews
LASCO 19-6065 Tubing Reducing Coupling Push-in Fitting, 3/8-Inch Od x 1/4-Inch Od, Plastic. Plastic push in fitting. 3/8-inch OD x 1/4-inch OD tubing reducing coupling. Quick connection. Good for use on PEX, poly, copper OD tubing. Clean tubing, push in by hand. LASCO, Lasso Supply Company Inc., The Preferred Brand! Service, Selection and Support!  Larsen Supply Company is 3rd Generation, Family owned and operated for over 80 years.  LASCO packaging includes helpful how to instructions and rel


John Guest Acetal Copolymer Tube Fitting, Flat End Adaptor, 3/8" Tube OD x 1/2" BSP Female (Pack of 10)
By John Guest
In Stock
$59.50
$38.89
You Save: 35%

mpn: PI451214FS, ean: 0665626055713,

4.7 out of 5 stars with 13 reviews
This John Guest flat-end adaptor fitting is made of acetal copolymer and has tube and BSPT female connectors. This flat-end adapter extends a run of piping by joining two pipes of different types. It is a push-to-connect fitting that connects to pipes or tubing on one end and has a British Standard Pipe (BSP) female connector on the other. The fitting is made of acetal copolymer plastic, which has low moisture absorption, high tensile and flexural strength, and is hard and fatigue resistant. The


K&S Square Tube 1/16" X 12" Brass Pack
By K&S
SKU: #5172622
In Stock
$26.14
$20.94
You Save: 20%

sku: 5172622, mpn: 8149, ean: 0614121181496,

4.9 out of 5 stars with 52 reviews
K & S SQUARE TUBE BRASS Size : 1/16 OD x 12 Length For hobbies and model building Each size telescopes into the next corresponding size Easy to cut and solder Brass Square Tube 2 Pack. Pack of 6.Size : 1/16'' OD x 12'' Length. For hobbies and model building. Each size telescopes into the next corresponding size. Easy to cut and solder. Brass Square Tube.


Colder PLCD10004 Acetal Tube Fitting, Coupler, Shutoff, In-Line, 1/4" Flow Coupler x 1/4" NPT Male
By Colder Products Company
In Stock
$14.70

mpn: PLCD10004,

4.8 out of 5 stars with 9 reviews
The Colder inline coupler is made of acetal copolymer plastic and has coupler and NPT male connectors. This shutoff elbow fitting, or ''ell,'' connects two fittings at an angle to change the direction of flow between pipes or tubes. This coupler connects to tubing on one end and a National Pipe Taper (NPT) male connector on the other. This is a general-purpose coupler with a thumb-latch design for one-handed connection and disconnection. This fitting is made of acetal copolymer plastic, which ha


5 Pcs Nickel-Plated Push to Connect Fittings, Quick Release Connectors Straight Union Connect Air Fittings Pneumatic Fittings for 5/32 1/4 5/16 3/8 1/2 Tube
By Zivisk
In Stock
$23.99
$11.99
You Save: 50%

mpn: LKPUT02, ean: 0765390143262,

4.8 out of 5 stars with 40 reviews
Feature:-EASY INSTALLATION - can be done within a short period of time. This tube connector is available in various styles and models Each model to serve its purpose All models are designed to suit your pneumatic piping needs perfectly. -CHANGING - You can easily change the tubing connector direction even after installation, The release ring conforms with the ellipse design to ensure that the disconnecting unit is in good shape. -MATERIAL - Safe and reliable material. Energy-saving, pollution-fr


Legines Brass Flare Fitting, SAE 45 Degree Flare Union, 1/2" OD x 1/2" OD (Pack of 2)
By legines
In Stock
$13.99

mpn: 42×8, ean: 6712441373417,

4.2 out of 5 stars with 47 reviews
The Legines union compression tube fitting is made of brass and has flare connectors. This union fitting has a threaded connection that can be screwed or unscrewed to connect or disconnect pipes more easily than couplings and has a 45-degree flare connection on both ends. This fitting is made of brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability. The operating temperatures for this fitting range from -65 to 250 degrees F. This fitting is suitable for co


John Guest Acetal Copolymer Tube Fitting, Reducing Elbow, 5/16" x 1/4" Tube OD (Pack of 10)
By John Guest
In Stock
$32.30

mpn: PI211008S, ean: 0665626053467,

4.9 out of 5 stars with 26 reviews
The John Guest reducing elbow is made of acetal copolymer plastic and has tube connectors. This fitting connects tubing of different diameters at an angle to change the direction of flow between pipes or tubing. This fitting is made of acetal copolymer plastic, which has low moisture absorption, high tensile and flexural strength, and is hard and fatigue resistant. The working pressure for this fitting is up to 230 pounds per square inch (psi). It is suitable for soft metal, plastic tubes, air,


Sydien 6mm to M5 Male Thread Nickel-Plated Brass Pneumatic Push in Air Quick Connect Fitting Straight Male Connector 10 Pcs
By Sydien
In Stock
$10.99

mpn: 861, ean: 0756171212550,

4.2 out of 5 stars with 37 reviews
Widely used in pneumatic system.It is designed to used with 6mm polyethylene, PU, and PA tubing.Simply connect to the tube and provide secure connection, requires no extra sealing. This Quick fittings are only used for industrial automatic apparatus and can not be applied on any medicinal equipment.Male Thread Diameter : M5;Inner Hole Diameter :6mm;Package Content : 10 x Quick Fittings. Elliptical release ring help to connect tube easily by manual, no special tools required.. It is designed for


Brennan Industries 4601-04-06-NWO-FG Forged Steel 90 Degree Elbow Adapter, Nut Washer O-Ring, 9/16"-18 AORB Thread, 1/4" Hose Barb x 9/16"-18 Male Adjustable O-Ring Boss, 0.625" Flats
By Brennan Industries
In Stock
$10.88

mpn: 4601-04-06-NWO-FG,

4.0 out of 5 stars with 33 reviews
04HB-06MAORB 90_ Elbow Forged.Made of Forged Steel. Hose Barb x Male Adjustable O-ring Boss Connection. 9/16''-18 Thread Size.


Swagelok SS-200-1-4 Stainless Steel Tube Fitting, Male Connector, 1/8" Tube OD, 1/4" Male NPT
By Swagelok
In Stock
$23.10
$16.04
You Save: 31%

mpn: SS-200-1-4,

4.8 out of 5 stars with 27 reviews
Connect fractional tubing to female NPT thread.1/8'' tube OD. 1/4'' male NPT. Made of stainless steel.


Tube Fitting
By Parker
In Stock
$28.90

mpn: VSTI11/4EDCF,

4.5 out of 5 stars with 24 reviews
The product type is Parker Tube fittings VSTI11/4EDCF. This product is made in United States and it is manufactured by PARKER HANNIFIN.Parker Tube Fitting Division. Made in United States. Manufactured by PARKER HANNIFIN.


Colder PLCD17004 Acetal Tube Fitting, Coupler, Shutoff, In-Line, 1/4" Flow Coupler x 1/4" Barb
By Colder Products Company
In Stock
$17.86
$14.18
You Save: 21%

mpn: PLCD17004,

4.9 out of 5 stars with 58 reviews
The Colder coupler is made of acetal copolymer plastic and has coupler and barbed connectors. This fitting connects tubing going in the same direction to extend a straight run. It is a fitting with a coupler on one end and barbed construction on the other, and is used for connecting two tubes in an inline configuration. This fitting is made of acetal copolymer plastic, which has low moisture absorption, high tensile and flexural strength, and is hard and fatigue resistant. The working pressure f


1/4" OD Quick Connect Push in to Connect Tube Fittings Set for RO Water Reverse Osmosis System Water, 30 Pcs Water Tube Fittings Ball Valve +T +I +L Type Combo
By Zivisk
In Stock
$23.99
$13.49
You Save: 44%

mpn: LKFLT01, ean: 0765390143095,

4.5 out of 5 stars with 24 reviews
Applications include RO system beverage dispensing refrigerator ice maker coffee machine etc. Push fit fittings, Quick Connect Fitting 1/4'' RO Water System. Standard fitting for water filter systems using 6mm water filter tubing. Easy to use, mini quick connect push tee 1/4-Inch OD. Suitable for use in hot and cold water applications.


Eaton Weatherhead 1072X4 Brass CA360 Mini-Barb Brass Fitting, Branch Tee, 1/4" Tube OD x 1/8" NPT Male
By Weatherhead
In Stock
$13.40

mpn: 1072X4, ean: 0798167854849,

4.6 out of 5 stars with 29 reviews
Hose fittings connect, control, change the direction of, and terminate the flow in piping and hose systems. They are made of brass, stainless steel, galvanized steel, and other materials that resist corrosion, pressure, and wear. Hose fittings have various types of connections, including threaded, barbed, push-to-connect, dry disconnect, and others including those based on internationally-accepted specifications. Hose fittings are used in systems such as air compressors, automatic manufacturing


LASCO 19-6507 Straight Shut Off Valve Push-in Fitting with 5/8-Inch OD Tubing, Plastic
By LASCO
In Stock
$14.99

mpn: 19-6507, ean: 0052151193018,

4.6 out of 5 stars with 46 reviews
LASCO 19-6507 Straight Shut Off Valve Push-in Fitting, 5/8-Inch Od Tubing, Plastic. Plastic push in fitting. 5/8-inch OD tubing. Straight shut off valve. Good for use on PEX, poly, copper OD tubing. Clean tubing, push in by hand. LASCO, Lasso Supply Company Inc., The Preferred Brand! Service, Selection and Support!  Larsen Supply Company is 3rd Generation, Family owned and operated for over 80 years.  LASCO packaging includes helpful how to instructions and related project item information. 


Parker Hannifin 66P-4-4 Poly-Tite Brass Female Connector Fitting, 1/4" Compression Tube x 1/4" Female Thread
By Parker Hannifin
In Stock
$10.99

mpn: 66P-4-4,

4.4 out of 5 stars with 38 reviews
Parker's poly-tite fittings are designed to speed any installation. The Body, nut and sleeve are furnished pre-assembled, ready for installation. The acetal Copolymer sleeve resists creeping and stress caused from compression. The black acetal Copolymer also resists ultra-violet Ray attack and has excellent dimensional stability. Poly-tite nuts will rotate around the sleeve as it tightens to prevent twisting and weakening of the plastic tubing. Poly-tite fittings can be assembled and disassemble



Viewing Page 3 of 5



Privacy Policy / Terms of Service / Accessibility Statement
© 2019 - servisplumbing.com. All Rights Reserved.