Push-to-Connect Fittings / Tube Fittings - Page 2 - Super Savings! Save up to 35%


Super Savings! Up to 35% off on Push-to-Connect Fittings (in Tube Fittings) at Servis Plumbing, Page 2 [89]. Top brands include beduan, Tailonz, PneumaticPlus, Tailonz Pneumatic, John Guest, utah pneumatic, Vixen Air, & ISPINNER. Hurry! Limited time offers. Offers valid only while supplies last.



Beduan Brass BPL Push to Connect Air Fittings Elbow 1/4" Tube OD x 1/8" NPT Male 90° Degree Adapter (Pack of 5)
By beduan
In Stock
$16.99

mpn: 1kl-08011-emt,

4.8 out of 5 stars with 18 reviews
Beduan Pneumatic Fittings are a compact one piece push-to-connect fitting.All items in the Beduan Pneumatic composite range are silicone free.The Nickle-Plated Brass gripping ring ensures excellent tube retention while the D sealwithin the fitting provides a positive seal on the O.D. of the tube,in both static and dynamic positions, due to an optimized design of the fitting cavity.Beduan Pneumatic composite should not be used for live swivel applicationsBody and collar are made of Nickle-Plated


Tailonz Pneumatic Male Elbow - 1/4 Inch Tube OD x 1/8 Inch NPT Thread PL-1/4-N1 Push to Connect Tube Fitting (Pack of 10)
By Tailonz
In Stock
$13.49

mpn: PL-1/4-N1, ean: 8431250493564,

4.9 out of 5 stars with 43 reviews
【GOOD SEALING】All thread are Teflon Coated. Please use straight cut tubing before inserting into the fitting.【IT IS EASY TO USE】 It is easy to insert or pull the trachea by hand without the aid of a tool. 【MATTERS NEED ATTENTION】 1.Please do not use it for purposes other than fluids.  2.Please do not exceed the maximum use pressure when using. 3.After the pipe is connected and installed, pull the pipe to make sure that the pipe cannot pull out the joint. 4.Do not use outside the ser


PneumaticPlus S-PC-1/4-N2 Push to Connect Fitting, Male Straight - 1/4" Tube OD x 1/4" NPT Thread (Pack of 10)
By PneumaticPlus
In Stock
$19.99
$13.99
You Save: 30%

mpn: S-PC-1/4-N2, ean: 0841693117275,

4.3 out of 5 stars with 12 reviews
PneumaticPlus offers push to connect fittings in a wide range of sizes, body styles and thread types for various pneumatic applications.Body Style: Male Straight. 1/4'' Tube OD x 1/4'' NPT Thread. Fluid Type: Air Only. Applicable Tube: Polyurethane and Nylon.


Tailonz Pneumatic Push to Connect Air Fittings 1/4 Inch od 1/8 Inch Npt Pneumatic Fittings Air Line Fittings Straight Union Fitting Pneumatic Connectors (Pack of 10)
By Tailonz Pneumatic
In Stock
$14.99

mpn: PCF1/4-N1, ean: 8431250493625,

4.6 out of 5 stars with 50 reviews
【GOOD SEALING】All thread are Teflon Coated. Please use straight cut tubing before inserting into the fitting. 【IT IS EASY TO USE】It is easy to insert or pull the trachea by hand without the aid of a tool. 【MATTERS NEED ATTENTION】 1.Please do not use it for purposes other than fluids.  2.Please do not exceed the maximum use pressure when using. 3.After the pipe is connected and installed, pull the pipe to make sure that the pipe cannot pull out the joint. 4.Do not use outside the se


Tailonz Pneumatic Male Elbow - 1/4 Inch Tube OD x 1/4 Inch NPT Thread,PL-1/4-N2 Push to Connect Tube Fitting (Pack of 10)
By Tailonz
In Stock
$14.99

mpn: PL-1/4-N2, ean: 8431250493557,

4.4 out of 5 stars with 43 reviews
【GOOD SEALING】All thread are Teflon Coated. Please use straight cut tubing before inserting into the fitting.【IT IS EASY TO USE】 It is easy to insert or pull the trachea by hand without the aid of a tool. 【MATTERS NEED ATTENTION】 1.Please do not use it for purposes other than fluids.  2.Please do not exceed the maximum use pressure when using. 3.After the pipe is connected and installed, pull the pipe to make sure that the pipe cannot pull out the joint. 4.Do not use outside the ser


John Guest Acetal Copolymer Tube Fitting, Union Straight Connector, 1/4" Tube OD (Pack of 10)
By John Guest
In Stock
$22.20
$18.96
You Save: 15%

mpn: PI0408S, ean: 0665626047664,

4.4 out of 5 stars with 9 reviews
This John Guest union straight connector fitting is made of acetal copolymer and has tube connectors. This union straight connector fitting is for connecting and disconnecting two inline pipes more easily than using couplings. It is a push-to-connect fitting that accepts the insertion of nylon, soft nylon and polyurethane tube fittings. It is made of acetal copolymer plastic, which has low moisture absorption, high tensile and flexural strength, and is hard and fatigue resistant. The working pre


Utah Pneumatic Push To Connect Fittings Nickel-Plated Brass Pc Male Straight 1/4"Od 1/8"Npt Thread Straight Connect Push Fit Fittings Tube Fittings Pneumatic Fittings 5 Pack (1/4od1/8npt Brass) 5 pack
By utah pneumatic
In Stock
$17.90

mpn: brasspc1418, ean: 0662187378060,

4.4 out of 5 stars with 58 reviews
CAUTION 1.The tube connectors are primarily made for air and water . Other fluid types are highly prohibited. 2. The use of pneumatic connector is limited to areas that are highly prone to fire outrage 3. Don't use the connections in areas whose water temperature is above 120'C 4. To avoid leakages and damage,you're advised to resist the temptation of adding extra loads to the push connectors USER GUIDE Carefully examine the tube connectors ends for a right angle cutting. Don't also forget to


Utah Pneumatic 10 Pack Plastic Push to Connect Fittings Tube Connect 1/4 inch od y spliter Push Fit Fittings Tube Fittings Push Lock (1/4 inch y spliter)
By utah pneumatic
In Stock
$12.90

mpn: y14444, ean: 0650966585334,

4.0 out of 5 stars with 24 reviews
User's Guide 1. Except air and water,don't attempt to use the fittings on other fluids 2. The tube fitting is prohibited where spark and fire might be occurred 3. The tube fitting is prohibited if water temperature is above 60'C 4. Never apply tube joint with additional external load(bending,twist or pulling),otherwise damage or leakage will be occurred.Caution Check the end of tubing for a right angle cutting and check the external surface of tubing for any damage or scratch.Please refer to fo


Utah Pneumatic Push to Connect Air Fittings 1/4" Od 1/4" Npt Elbow Nickel-Plated Brass Pneumatic Fittings Air Line Fittings 90 Degree Air Fitting Union Fitting Pneumatic Connectors (5 Pack pl1/41/4b)
By utah pneumatic
In Stock
$17.90

mpn: B104 1/4-1/8NPT, ean: 0662187378220,

4.4 out of 5 stars with 24 reviews
CAUTION 1.The tube connectors are primarily made for air and water . Other fluid types are highly prohibited. 2. The use of pneumatic connector is limited to areas that are highly prone to fire outrage 3. Don't use the connections in areas whose water temperature is above 120'C 4. To avoid leakages and damage,you're advised to resist the temptation of adding extra loads to the push connectors USER GUIDE Carefully examine the tube connectors ends for a right angle cutting. Don't also forget to


Utah Pneumatic Pack of 5 Nickel-Plated Brass Push to Connect Air line Fittings Tee 1/4"Od Union Connect Air Fittings Quick Connect Push Lock Fittings Air Bag Fittings Pneumatic Fittings
By utah pneumatic
In Stock
$28.40
$19.90
You Save: 30%

mpn: wtb111, ean: 0652827872331,

4.7 out of 5 stars with 32 reviews
CAUTION 1.The tube connectors are primarily made for air and water . Other fluid types are highly prohibited. 2. The use of pneumatic connector is limited to areas that are highly prone to fire outrage 3. Don't use the connections in areas whose water temperature is above 120'C 4. To avoid leakages and damage,you're advised to resist the temptation of adding extra loads to the push connectors USER GUIDE Carefully examine the tube connectors ends for a right angle cutting. Don't also forget to


Vixen Air 3/8" NPT Male Push to Connect (PTC) Straight Pneumatic Fitting for 3/8" OD Hose VXA7383
By Vixen Air
In Stock
$10.18

mpn: VXA7383, ean: 0636967106082,

4.6 out of 5 stars with 28 reviews
This zinc plated, push to connect straight pneumatic fitting, accepts a 3/8'' OD hose, while the threaded end is 3/8'' NPT Male. Made of durable brass material that can support up to 250 PSI. Hose is installed by pushing the tube into the hole until the mechanism locks. To remove the hose, simply press the release button, no tools are necessary. A high quality fitting manufactured to the highest standards required for air suspension applications. 3/8'' NPT Push to Connect (PTC) Straight Pneumati


PneumaticPlus PC-5/16-N2 Push to Connect Tube Fitting, Male Straight - 5/16" Tube OD x 1/4" NPT Thread (Pack of 10)
By PneumaticPlus
In Stock
$15.34

mpn: PC-5/16-N2,

4.6 out of 5 stars with 36 reviews
PneumaticPlus offers composite fittings in wide range of sizes, body styles and thread types for various pneumatic applications.Body Style: Male Straight. 5/16'' Tube OD x 1/4'' NPT Thread. Fluid Type: Air Only. Applicable Tube: Polyurethane and Nylon.


PneumaticPlus PC-3/8-N2 Push to Connect Tube Fitting, Male Straight - 3/8" Tube OD x 1/4" NPT Thread (Pack of 10)
By PneumaticPlus
In Stock
$21.99

mpn: PC-3/8-N2,

4.2 out of 5 stars with 48 reviews
PneumaticPlus offers composite fittings in wide range of sizes, body styles and thread types for various pneumatic applications.Body Style: Male Straight. 3/8'' Tube OD x 1/4'' NPT Thread. Fluid Type: Air Only. Applicable Tube: Polyurethane and Nylon.


Utah Pneumatic 8mm or 5/16 od Push To Connect Fittings pneumatic fittings kit 2 Spliters+2 elbows+2 tee+2 Straight+1 Manifold+ Hand Valves Ultimate professional set 10 pack Plastic(8mm combo)
By utah pneumatic
In Stock
$15.70

mpn: co66663, ean: 0646648150440,

4.5 out of 5 stars with 30 reviews
Utah Pneumatic Fittings are a compact one piece push-to-connect fitting. All items in the Utah Pneumatic composite range are silicone free. The Stainless steel gripping ring ensures excellent tube retention while the D seal within the fitting provides a positive seal on the O.D. of the tube, in both static and dynamic positions, due to an optimized design of the fitting cavity. Utah Pneumatic composite should not be used for live swivel applications. Body and collar are made of Nylon 6.6, grippi


Utah Pneumatic Nickel-Plated Brass Push to Connect air Fittings 1/4"od Straight Union Connect air Fittings Quick Connect Push Lock Fittings air Bag Fittings Pneumatic Fittings Tube connectors (5 Pack)
By utah pneumatic
In Stock
$28.90
$18.90
You Save: 35%

mpn: wsb111, ean: 0652827872379,

4.2 out of 5 stars with 18 reviews
CAUTION 1.The tube connectors are primarily made for air and water . Other fluid types are highly prohibited. 2. The use of pneumatic connector is limited to areas that are highly prone to fire outrage 3. Don't use the connections in areas whose water temperature is above 120'C 4. To avoid leakages and damage,you're advised to resist the temptation of adding extra loads to the push connectors USER GUIDE Carefully examine the tube connectors ends for a right angle cutting. Don't also forget to


Beduan Pneumatic BPC Push to Connect Air Pipe Fittings Male Straight 4mm Tube OD x 1/8" Male Thread (Pack of 10)
By beduan
In Stock
$15.98

mpn: kl00020, ean: 0753936368828,

4.6 out of 5 stars with 9 reviews
Beduan Pneumatic Fittings are a compact one piece push-to-connect fitting.All items in the Beduan Pneumatic composite range are silicone free.The Stainless steel gripping ring ensures excellent tube retention while the D sealwithin the fitting provides a positive seal on the O.D. of the tube,in both static and dynamic positions, due to an optimized design of the fitting cavity.Beduan Pneumatic composite should not be used for live swivel applicationsBody and collar are made of Nylon 6.6, grippin


Utah Pneumatic Plastic Push to Connect Fittings Tube 10 Pack 1/4" Od Straight Push Fit Fittings Tube Fittings Push Lock Hose Union (1/4" Straight)
By utah pneumatic
In Stock
$17.90
$13.90
You Save: 22%

mpn: wj1111, ean: 0652827872515,

4.4 out of 5 stars with 11 reviews
User's Guide 1. Except air and water,don't attempt to use the fittings on other fluids 2. The tube fitting is prohibited where spark and fire might be occurred 3. The tube fitting is prohibited if water temperature is above 60'C 4. Never apply tube joint with additional external load(bending,twist or pulling),otherwise damage or leakage will be occurred.Caution Check the end of tubing for a right angle cutting and check the external surface of tubing for any damage or scratch.Please refer to fo


ISPINNER 10pcs 3/8" Tube OD x 1/4" NPT Thread Elbow Push to Connect Fittings, Quick Release Pneumatic Connectors PL-3/8-N2
By ISPINNER
In Stock
$13.99

mpn: PL-3/8-N2,

4.3 out of 5 stars with 32 reviews
FEATURE:Easy to install, no need for other tools, just insert the tube inside. All models of push lock fittings are designed to suit your pneumatic piping needs perfectly. Long service life. You can easily change the tubing connector direction. Narrow space is also suitable with the push. SPECIFICATION:Working Pressure: 0-990KPa | 0-150psiNegative Pressure: -29.5 in Hg | -750mm Hg (10 Torr)Working Temperature: 0-60¡æ | 32-140¨H Recommended material: Nylon or PolyurethanePACKAGE INCLUDES:Total


Vixen Air 3/8" NPT Male Push to Connect (PTC) Straight Pneumatic Fitting for 3/8" OD Hose Bundle of six Fittings VXA7383-6
By Vixen Air
In Stock
$32.48

mpn: VXA73836, ean: 0636967106099,

4.1 out of 5 stars with 27 reviews
This zinc plated, push to connect straight pneumatic fitting, accepts a 3/8'' OD hose, while the threaded end is 3/8'' NPT Male. Made of durable brass material that can support up to 250 PSI. Hose is installed by pushing the tube into the hole until the mechanism locks. To remove the hose, simply press the release button, no tools are necessary. A high quality fitting manufactured to the highest standards required for air suspension applications. 3/8'' NPT Push to Connect (PTC) Straight Pneumati


Vixen Air 3/8" NPT Male Push to Connect (PTC) Straight Pneumatic Fitting for 3/8" OD Hose Bundle of Four Fittings VXA7383-4
By Vixen Air
In Stock
$29.58

mpn: VXA73834, ean: 0636967109915,

4.0 out of 5 stars with 59 reviews
This zinc plated, push to connect straight pneumatic fitting, accepts a 3/8'' OD hose, while the threaded end is 3/8'' NPT Male. Made of durable brass material that can support up to 250 PSI. Hose is installed by pushing the tube into the hole until the mechanism locks. To remove the hose, simply press the release button, no tools are necessary. A high quality fitting manufactured to the highest standards required for air suspension applications. 3/8'' NPT Push to Connect (PTC) Straight Pneumati



Viewing Page 2 of 5