Flared Tube Fittings / Tube Fittings - On Sale Now! Save up to 3%


On Sale! Up to 3% off on Flared Tube Fittings (in Tube Fittings) at Servis Plumbing [98]. Top brands include Weatherhead, Aeroquip, brennan, MeiChi, Vis, C&D Valve, Anderson Metals, & Parker Hannifin. Hurry! Limited time offers. Offers valid only while supplies last.



Eaton Weatherhead 202X3 Brass CA360 Inverted Flare Brass Fitting, Adapter, 1/8" NPT Male x 3/16" Tube OD (Pack of 10)
By Weatherhead
In Stock
$18.00

mpn: 202X3,

4.2 out of 5 stars with 50 reviews
This Eaton Weatherhead 202X3 brass female inverted flare fitting adapts a tube nut for 3/16'' outside diameter (OD) rigid tubing to 1/8'' National Pipe Taper (NPT) threads. The female inverted flare end has 3/8-24 National Pipe Straight Mechanical (NPSM) threads and creates a compression seal. It has a working pressure of up to 2,000 pounds per square inch (psi). The fitting is made of CA360 brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability. This femal


Eaton Aeroquip 1290-6S Steel Versil-Flare Flared Tube Fitting, Nut, 3/8" Tube OD, 9/16" Female JIC (Pack of 10)
By Aeroquip
In Stock
$14.40

mpn: 1290-6S,

4.7 out of 5 stars with 21 reviews
Tube fittings are components used for connecting, branching, terminating, and changing the direction of tubing in pneumatic and hydraulic systems. They are made of brass, stainless steel, PBT (polybutylene terephthalate), and other materials that resist corrosion and wear. Tube fittings have various types of connections, including threaded, welded, barbed, and push-to-connect (also called one-touch). Push-to-connect connections do not require tools or sealants. Tube fittings are used in various


Brennan 2501-04-04-SS, Stainless Steel JIC Tube Fitting, 04MJ-04MP 90 Degree Elbow, 1/4" Tube OD x 1/4"-18  NPTF Male
By brennan
In Stock
$24.65

mpn: 2501-04-04-SS,

4.1 out of 5 stars with 31 reviews
This Brennan 2501-SS series 90-degree elbow tube fitting is made of stainless steel 316, has a male JIC tube connection and a male NPTF connection, and is suitable for use in high-pressure fuel delivery and fluid power applications. It is made of stainless steel 316 for higher strength and greater corrosion resistance than stainless steel 304 and has a maximum pressure rating of 5,000 pounds per square inch (psi) at an operating temperature range of -425 to +1,200 degrees F. This 90-degree elbow


Eaton Weatherhead 202X5X4 Brass CA360 Inverted Flare Brass Fitting, Adapter, 1/4" NPT Male x 5/16" Tube OD (Pack of 10)
By Weatherhead
In Stock
$26.46

mpn: 202X5X4,

4.2 out of 5 stars with 34 reviews
Hose fittings connect, control, change the direction of, and terminate the flow in piping and hose systems. They are made of brass, stainless steel, galvanized steel, and other materials that resist corrosion, pressure, and wear. Hose fittings have various types of connections, including threaded, barbed, push-to-connect, dry disconnect, and others including those based on internationally-accepted specifications. Hose fittings are used in systems such as air compressors, automatic manufacturing


Eaton Weatherhead 202X10 Brass CA360 Inverted Flare Brass Fitting, Adapter, 1/2" NPT Male x 5/8" Tube OD
By Weatherhead
In Stock
$15.09

mpn: 202X10, ean: 0696738093997,

4.4 out of 5 stars with 23 reviews
This Eaton Weatherhead 202X10 brass female inverted flare fitting adapts a tube nut for 5/8'' outside diameter (OD) rigid tubing to 1/2'' National Pipe Taper (NPT) threads. The female inverted flare end has 7/8-18 National Pipe Straight Mechanical (NPSM) threads and creates a compression seal. It has a working pressure of up to 2,000 pounds per square inch (psi). The fitting is made of CA360 brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability. This femal


Eaton Aeroquip 900605-6S Steel Versil-Flare Flared Tube Fitting, Sleeve, 3/8" Female JIC (Pack of 10)
By Aeroquip
In Stock
$10.78

mpn: 900605-6S,

4.4 out of 5 stars with 18 reviews
Tube fittings are components used for connecting, branching, terminating, and changing the direction of tubing in pneumatic and hydraulic systems. They are made of brass, stainless steel, polybutylene terephthalate (PBT), and other materials that resist corrosion and wear. Tube fittings have various types of connections, including threaded, welded, barbed, and push-to-connect (also called one-touch). Push-to-connect connections do not require tools or sealants. Tube fittings are used in various


Eaton Aeroquip 2242-4-4S Female 37 Degree JIC Swivel to Female Pipe, JIC 37 Degree & NPT End Types, Carbon Steel, 1/4 JIC(f) x 1/4 NPT(f) End Size, 1/4" Tube OD, 1/4" Female Pipe Size
By Aeroquip
In Stock
$10.27
$9.97
You Save: 3%

mpn: 2242-4-4S,

4.7 out of 5 stars with 10 reviews
Tube fittings are components used for connecting, branching, terminating, and changing the direction of tubing in pneumatic and hydraulic systems. They are made of brass, stainless steel, polybutylene terephthalate (PBT), and other materials that resist corrosion and wear. Tube fittings have various types of connections, including threaded, welded, barbed, and push-to-connect (also called one-touch). Push-to-connect connections do not require tools or sealants. Tube fittings are used in various


Eaton Weatherhead C5205X4X4 Carbon Steel SAE 37 Degree (JIC) Flare-Twin Fitting, Adapter, 1/4" NPT Male x 1/4" JIC Male (Pack of 10)
By Weatherhead
In Stock
$16.00

mpn: C5205X4X4,

4.7 out of 5 stars with 19 reviews
This Eaton Weatherhead C5205X4X4 adapter fitting is suitable for joining a pipe to tube in a range of fluid transfer applications. It has 1/4'' male National Pipe Taper (NPT) threads on one end and male 7/16-20 Joint Industry Council (JIC) threads on the other for use with 1/4'' outside diameter (OD) tubes. The fitting is made of zinc-plated 12L14 carbon steel for strength, durability, and resistance to corrosion, has an operating temperature range of -65 to +400 degrees F (-53 to +204 degrees C


Brass Flare Union 5/16" OD x 5/16" OD SAE 45 Degree Flared Tube Fitting, 5pcs
By MeiChi
In Stock
$15.99

mpn: 42*5-5, ean: 0745396603625,

4.8 out of 5 stars with 52 reviews
Used for a variety of applications, not limited to This union tube fitting is made of brass and has flare connectors. This union fitting has a threaded connection that can be screwed or unscrewed to connect or disconnect pipes more easily than couplings and has a 45-degree flare connection on both ends. This fitting is made of brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability. The operating temperatures for this fitting range from -65 to 250 degrees F.


Vis Brass SAE 45 Degree Flare Tube Fitting, Reducing Flare Tee Union, 3/8" x 1/2" x 3/8" Tube O.D. (Pack of 1)
By Vis
In Stock
$11.99

mpn: 44-2,

4.4 out of 5 stars with 39 reviews
The flare tee is made of brass and has tubing connectors. This fitting is T-shaped and has three openings to connect and branch three pipes, two on the main run and one branch at a 90-degree angle from the middle of the tee. It connects to tubing on all three, flared ends. This fitting is made of brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability. This fitting has 45-degree flared construction for a stronger connection than soldered, long-term reliabili


C&D Valve CD9611 Tee Connector , 1/4" f. flare w/ depressor tip x 1/4" m. flare access x 1/4" m. flare access , Sold Each
By C&D Valve
In Stock
$10.66
$10.45
You Save: 2%

mpn: CD9611-EA_1,

4.4 out of 5 stars with 12 reviews
Part # CD9611, 1/4'' F. Flare w/ Depressor Tip x 1/4'' x 1/4'' M. Flare Access x 1/4'' M. Flare Access on BranchItem Specifications: C&D Valve Mfg. products are unconditionally warranted against defective material and workmanship, and will perform to complete satisfaction when used in accordance with our instructions.Additional Information:FREE SHIPPING!1/4'' M. Flare Access x 1/4'' M. Flare Access x 1/4'' x 1/4'' F. Flare with Depressor Tip on BranchIncludes Valve Core and Cap , Forged BrassMan


Anderson Metals Brass Tube Fitting, Flare Tee, 1/4" x 1/4" x 1/4" Flare
By Anderson Metals
In Stock
$10.89

mpn: 54044-04, ean: 0719852934851,

4.2 out of 5 stars with 41 reviews
The Anderson Metals flare tee is made of brass and has tubing connectors. This fitting is T-shaped and has three openings to connect and branch three pipes, two on the main run and one branch at a 90-degree angle from the middle of the tee. It connects to tubing on all three, flared ends. This fitting is made of brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability. This fitting has 45-degree flared construction for a stronger connection than soldered, lon


Eaton Weatherhead C5205X12X8 Carbon Steel SAE 37 Degree (JIC) Flare-Twin Fitting, Adapter, 1/2" NPT Male x 3/4" JIC Male (Pack of 5)
By Weatherhead
In Stock
$26.97

mpn: C5205X12X8,

4.8 out of 5 stars with 57 reviews
This Eaton Weatherhead C5205X12X8 Flare-Twin adapter connects hydraulic hoses or fittings of different types. It is made of zinc-plated American Iron and Steel Institute (AISI) 12L14 carbon steel for tensile strength, hardness and resistance to corrosion. It has a male 3/4'' Joint Industry Council (JIC) 37-degree flare on one end and male 1/2'' National Pipe Thread (NPT) on the other end for connecting two female threaded fittings. It is 2.06'' in length, with a .531'' inside diameter (ID) and a


Eaton Weatherhead 1110X4 Brass CA360 SAE 45 Degree Flare, Nut, 1/4" Tube OD (Pack of 10)
By Weatherhead
In Stock
$17.57

mpn: 1110X4,

4.7 out of 5 stars with 37 reviews
Hose fittings connect, control, change the direction of, and terminate the flow in piping and hose systems. They are made of brass, stainless steel, galvanized steel, and other materials that resist corrosion, pressure, and wear. Hose fittings have various types of connections, including threaded, barbed, push-to-connect, dry disconnect, and others including those based on internationally-accepted specifications. Hose fittings are used in systems such as air compressors, automatic manufacturing


Eaton Weatherhead C5315X8 Carbon Steel SAE 37-Degree (JIC) Flare-Twin Fitting, Adapter, 1/2" Straight Thread O-Ring Boss x 1/2" JIC Male (Pack of 4)
By Weatherhead
In Stock
$13.56

mpn: C5315X8,

4.2 out of 5 stars with 58 reviews
This Eaton Weatherhead C5315X8 steel connector adapts a 1/2'' NPTF male end with O-ring to a 1/2'' JIC 37-degree male flare end. The O-ring creates a compression seal for the National Pipe Taper Fuel (NPTF) male connection. It has a working pressure of up to 3,000 pounds per square inch (psi). The fitting is made of carbon steel for durability and resistance to rupture under high pressure and is zinc plated for resistance to corrosion. This Joint Industry Council (JIC) 37-degree flare fitting me


Eaton Weatherhead C5205X5X4 Carbon Steel SAE 37 Degree (JIC) Flare-Twin Fitting, Adapter, 1/4" NPT Male x 5/16" JIC Male (Pack of 4)
By Weatherhead
In Stock
$13.80

mpn: C5205X5X4,

4.8 out of 5 stars with 52 reviews
Tube fittings are components used for connecting, branching, terminating, and changing the direction of tubing in pneumatic and hydraulic systems. They are made of brass, stainless steel, polybutylene terephthalate (PBT), and other materials that resist corrosion and wear. Tube fittings have various types of connections, including threaded, welded, barbed, and push-to-connect (also called one-touch). Push-to-connect connections do not require tools or sealants. Tube fittings are used in various


Eaton Weatherhead 131X3 Brass CA360 Inverted Flare Brass Fitting, Plug, 3/16" Tube OD (Pack of 10)
By Weatherhead
In Stock
$12.70

mpn: 131X3,

4.1 out of 5 stars with 20 reviews
This Eaton Weatherhead 131X3 inverted flare plug fitting is suitable for closing the end of a tube. It has male 3/8-24 inverted flare threads for use with 3/16'' outside diameter (OD) tubes. The fitting is made of CA360 brass for strength and resistance to corrosion, has an operating temperature range of -65 to +250 degrees F (-53 to +121 degrees C), and meets Society of Automotive Engineers (SAE) 040109 specifications for tube fittings. This inverted flare plug fitting is suitable for closing t


Vis Brass SAE 45 Degress Flare Tube Fitting, Union,1/4" x 1/4" Flare (Pack of 5)
By Vis
In Stock
$10.99

mpn: 42,

4.4 out of 5 stars with 52 reviews
The union tube fitting is made of brass and has flare connectors. This union fitting has a threaded connection that can be screwed or unscrewed to connect or disconnect pipes more easily than couplings and has a 45-degree flare connection on both ends. This fitting is made of brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability. The operating temperatures for this fitting range from -65 to 250 degrees F. This fitting is suitable for copper, brass, aluminu


JB Industries A33500 Replacement - 1/4" F. Flare Compact Thumbscrew Core Depressor
By C&D Valve
In Stock
$13.75

mpn: CD5050-EA_4,

4.2 out of 5 stars with 54 reviews
Part # CD5050 , 1/4'' F. Flare Reduced Size Thumb-Screw Flow-Control Valve Connects to 1/4'' M. Flare Access FittingItem Specifications: C&D Valve Mfg. products are unconditionally warranted against defective material and workmanship, and will perform to complete satisfaction when used in accordance with our instructions.Additional Information:FREE SHIPPING!1/4'' F. Flare Reduced Size Thumb-Screw Flow-Control ValveConnects to 1/4'' M. Flare Access FittingManufactured and Packaged in U.S.A.Packag


Parker Hannifin 639F-8 Brass Seal Plug, 45 Degree Flare Fitting, 1/2" Tube Size
By Parker Hannifin
In Stock
$12.28

mpn: 639F-8,

4.1 out of 5 stars with 39 reviews
Parker's 45° flare fittings are economical for a metal-to-metal seal that are designed for high pressure service and have exceptional resistance to mechanical pull out. The positive nature of the connection with the flare on the tube clamped between the nut and the body makes for extreme dependability and safety. Flare fittings are appropriate alternatives for solder type joints where an open flame is either not desired or impractical. Fittings are available in forgings for refrigeration applic



Viewing Page 1 of 5