Flared Tube Fittings / Tube Fittings - Page 2 - Blowout Sale! Save up to 67%


Blowout Sale! Up to 67% off on Flared Tube Fittings (in Tube Fittings) at Servis Plumbing, Page 2 [98]. Top brands include Legines, Parker Hannifin, brennan, Weatherhead, Aeroquip, & Vis. Hurry! Limited time offers. Offers valid only while supplies last.



Legines Brass Inverted Flare Fitting, Brake Line 45 Degree Male Elbow, 3/8" Tube OD x 1/4" NPT Male, Pack of 2
By Legines
In Stock
$11.99

ean: 6937997091404,

4.0 out of 5 stars with 17 reviews
Tube fittings are components used for connecting, branching, terminating, and changing the direction of tubing in pneumatic and hydraulic systems. They are made of brass, stainless steel, polybutylene terephthalate (PBT), and other materials that resist corrosion and wear. Tube fittings have various types of connections, including threaded, welded, barbed, and push-to-connect (also called one-touch). Push-to-connect connections do not require tools or sealants. Tube fittings are used in various


Parker Hannifin 14FSV-4 Brass Swivel Nut Valve Connector 45 Degree Flare Fitting, 1/4" NPT Swivel Nut Tube x 1/4" NPT Swivel Nut Tube
By Parker Hannifin
In Stock
$12.20
$4.02
You Save: 67%

mpn: 14FSV-4,

4.1 out of 5 stars with 45 reviews
Parker's 45° flare fittings are economical for a metal-to-metal seal that are designed for high pressure service and have exceptional resistance to mechanical pull out. The positive nature of the connection with the flare on the tube clamped between the nut and the body makes for extreme dependability and safety. Flare fittings are appropriate alternatives for solder type joints where an open flame is either not desired or impractical. Fittings are available in forgings for refrigeration applic


Brennan 2700-12-12, Steel JIC Tube Fitting, 12MJ-12MJ Bulkhead, 3/4" Tube OD, Male
By brennan
In Stock
$12.74

mpn: 2700-12-12,

4.6 out of 5 stars with 19 reviews
The Brennan 2700 series MJ bulkhead fitting is made of steel and has JIC male connectors. This is a bulkhead fitting designed to be mounted in a wall or bulkhead to allow tube connection on either side of a barrier. It has Joint Industrial Council (JIC) flared male connectors for connecting to female JIC pipes on both ends. It is made of steel for its better weldability and increased rust resistance over iron. The operating temperatures for this fitting range from -63 to 400 degrees F. This fitt


Eaton Weatherhead C5205X8X8 Carbon Steel SAE 37 Degree (JIC) Flare-Twin Fitting, Adapter, 1/2" NPT Male x 1/2" JIC Male (Pack of 4)
By Weatherhead
In Stock
$14.23
$13.50
You Save: 5%

mpn: C5205X8X8,

4.5 out of 5 stars with 14 reviews
Tube fittings are components used for connecting, branching, terminating, and changing the direction of tubing in pneumatic and hydraulic systems. They are made of brass, stainless steel, polybutylene terephthalate (PBT), and other materials that resist corrosion and wear. Tube fittings have various types of connections, including threaded, welded, barbed, and push-to-connect (also called one-touch). Push-to-connect connections do not require tools or sealants. Tube fittings are used in various


Eaton Aeroquip 2071-4-4S 90 Degree Swivel Nut Elbow, JIC 37 Degree End Types, Carbon Steel, 1/4 JIC(f) x 1/4 JIC(m) End Size, 1/4" Tube OD (Pack of 4)
By Aeroquip
In Stock
$19.78

mpn: 2071-4-4S,

4.1 out of 5 stars with 35 reviews
90-degree elbow to connect a Joint Industry Council (JIC) male thread to a JIC female thread at a 90-degree angle. Female JIC threads on one end and male JIC threads on the other end for connecting tubes with different ends. Carbon steel for tensile strength and hardness. Standard weight for light to medium pressure applications. Society of Automotive Engineers (SAE)-compliant for SAE standards J512, J513, J514, J1926 and J1453 for functional requirements.


Eaton Weatherhead 40X4 Brass CA360 SAE 45 Degree Flare, Cap, 1/4" Tube OD (Pack of 20)
By Weatherhead
In Stock
$18.26

mpn: 40X4,

4.1 out of 5 stars with 29 reviews
This Eaton Weatherhead 40X4 cap fitting is suitable for closing the end of a male-threaded flare tube. It has female 7/16-20 Society of Automotive Engineers flare threads for use with 1/4'' outside diameter (OD) tubes. The fitting is made of CA360 brass for strength and resistance to corrosion and has an operating temperature range of -65 to +250 degrees F (-53 to +121 degrees C). This cap fitting is suitable for closing the end of a tube in lubrication, refrigeration, and hydraulic systems, and


Eaton Aeroquip 2242-8-8S Female 37 Degree JIC Swivel to Female Pipe, JIC 37 Degree & NPT End Types, Carbon Steel, 1/2 JIC(f) x 1/2 NPT(f) End Size, 1/2" Tube OD, 1/2" Female Pipe Size
By Aeroquip
In Stock
$12.35

mpn: 2242-8-8S,

4.3 out of 5 stars with 52 reviews
Tube fittings are components used for connecting, branching, terminating, and changing the direction of tubing in pneumatic and hydraulic systems. They are made of brass, stainless steel, polybutylene terephthalate (PBT), and other materials that resist corrosion and wear. Tube fittings have various types of connections, including threaded, welded, barbed, and push-to-connect (also called one-touch). Push-to-connect connections do not require tools or sealants. Tube fittings are used in various


Legines Brass Inverted Flare Fitting, Barstock Brake Line 90 Degree Male Elbow, 1/4" Tube OD x 1/8" NPT Male, Pack of 2
By Legines
In Stock
$11.99

ean: 6937997091435,

4.9 out of 5 stars with 40 reviews
Tube fittings are components used for connecting, branching, terminating, and changing the direction of tubing in pneumatic and hydraulic systems. They are made of brass, stainless steel, polybutylene terephthalate (PBT), and other materials that resist corrosion and wear. Tube fittings have various types of connections, including threaded, welded, barbed, and push-to-connect (also called one-touch). Push-to-connect connections do not require tools or sealants. Tube fittings are used in various


Eaton Aeroquip 2021-8-10S Male Connector, Male 37 Degree JIC, Male Pipe Thread, JIC 37 Degree & NPT End Types, Carbon Steel, 1/2 NPT(m) x 5/8 JIC(m) End Size, 5/8" Tube OD
By Aeroquip
In Stock
$10.08
$6.87
You Save: 32%

mpn: 2021-8-10S,

4.0 out of 5 stars with 49 reviews
Tube fittings are components used for connecting, branching, terminating, and changing the direction of tubing in pneumatic and hydraulic systems. They are made of brass, stainless steel, polybutylene terephthalate (PBT), and other materials that resist corrosion and wear. Tube fittings have various types of connections, including threaded, welded, barbed, and push-to-connect (also called one-touch). Push-to-connect connections do not require tools or sealants. Tube fittings are used in various


Eaton Aeroquip 2024-8-10S 90 Degree Male Elbow, JIC 37 Degree & NPT End Types, Carbon Steel, 1/2 NPT(m) x 5/8 JIC(m) End Size, 5/8" Tube OD, 1/2" Male Pipe Size
By Aeroquip
In Stock
$13.85
$10.21
You Save: 26%

mpn: 2024-8-10S,

4.7 out of 5 stars with 20 reviews
Tube fittings are components used for connecting, branching, terminating, and changing the direction of tubing in pneumatic and hydraulic systems. They are made of brass, stainless steel, polybutylene terephthalate (PBT), and other materials that resist corrosion and wear. Tube fittings have various types of connections, including threaded, welded, barbed, and push-to-connect (also called one-touch). Push-to-connect connections do not require tools or sealants. Tube fittings are used in various


Eaton Weatherhead 202X6X2 Brass CA360 Inverted Flare Brass Fitting, Adapter, 1/8" NPT Male x 3/8" Tube OD (Pack of 5)
By Weatherhead
In Stock
$16.19

mpn: 202X6X2,

4.3 out of 5 stars with 26 reviews
Hose fittings connect, control, change the direction of, and terminate the flow in piping and hose systems. They are made of brass, stainless steel, galvanized steel, and other materials that resist corrosion, pressure, and wear. Hose fittings have various types of connections, including threaded, barbed, push-to-connect, dry disconnect, and others including those based on internationally-accepted specifications. Hose fittings are used in systems such as air compressors, automatic manufacturing


Eaton Aeroquip 2021-6-10S Male Connector, Male 37 Degree JIC, Male Pipe Thread, JIC 37 Degree & NPT End Types, Carbon Steel, 3/8 NPT(m) x 5/8 JIC(m) End Size, 5/8" Tube OD
By Aeroquip
In Stock
$11.99
$7.39
You Save: 38%

mpn: 2021-6-10S,

4.6 out of 5 stars with 38 reviews
Tube fittings are components used for connecting, branching, terminating, and changing the direction of tubing in pneumatic and hydraulic systems. They are made of brass, stainless steel, polybutylene terephthalate (PBT), and other materials that resist corrosion and wear. Tube fittings have various types of connections, including threaded, welded, barbed, and push-to-connect (also called one-touch). Push-to-connect connections do not require tools or sealants. Tube fittings are used in various


Eaton Aeroquip 203102-8-8S Swivel Nut Run Tee, JIC 37 Degree End Types, Carbon Steel, 1/2 JIC(f) x 1/2 JIC(m) End Size, 1/2" Tube OD
By Aeroquip
In Stock
$14.19

mpn: 203102-8-8S,

4.2 out of 5 stars with 29 reviews
Tube fittings are components used for connecting, branching, terminating, and changing the direction of tubing in pneumatic and hydraulic systems. They are made of brass, stainless steel, polybutylene terephthalate (PBT), and other materials that resist corrosion and wear. Tube fittings have various types of connections, including threaded, welded, barbed, and push-to-connect (also called one-touch). Push-to-connect connections do not require tools or sealants. Tube fittings are used in various


Vis Brass CA360 Flared Tube Fitting, SAE 45 Degree Flare, Cap, 3/4" Tube OD (Pack of 1)
By Vis
In Stock
$10.99

mpn: 40,

4.0 out of 5 stars with 16 reviews
This cap fitting is suitable for closing the end of a male-threaded flare tube. The fitting is made of CA360 brass for strength and resistance to corrosion and has an operating temperature range of -65 to +250 degrees F (-53 to +121 degrees C). This cap fitting is suitable for closing the end of a tube in lubrication, refrigeration, and hydraulic systems, and in other industrial applications. Tube fittings are components used for connecting, branching, terminating, and changing the direction of


Eaton Aeroquip 203102-12-12S Swivel Nut Run Tee, JIC 37 Degree End Types, Carbon Steel, 3/4 JIC(f) x 3/4 JIC(m) End Size, 3/4" Tube OD
By Aeroquip
In Stock
$14.58

mpn: 203102-12-12S, ean: 0094726956413,

4.4 out of 5 stars with 47 reviews
Tube fittings are components used for connecting, branching, terminating, and changing the direction of tubing in pneumatic and hydraulic systems. They are made of brass, stainless steel, polybutylene terephthalate (PBT), and other materials that resist corrosion and wear. Tube fittings have various types of connections, including threaded, welded, barbed, and push-to-connect (also called one-touch). Push-to-connect connections do not require tools or sealants. Tube fittings are used in various


Parker Hannifin 166FSV-8-8 Brass 90 Degree Swivel Elbow, 45 Degree Flare Fitting, 1/2" Flare Tube x 1/2" Female NPT Flare Swivel
By Parker Hannifin
In Stock
$15.17

mpn: 166FSV-8-8,

4.7 out of 5 stars with 25 reviews
Parker's 45° flare fittings are economical for a metal-to-metal seal that are designed for high pressure service and have exceptional resistance to mechanical pull out. The positive nature of the connection with the flare on the tube clamped between the nut and the Body makes for extreme dependability and Safety. Flare fittings are appropriate alternatives for solder Type joints where an open flame is either not desired or impractical. Fittings are available in forgings for refrigeration applic


Eaton Weatherhead C5205X8 Carbon Steel SAE 37 Degree (JIC) Flare-Twin Fitting, Adapter, 3/8" NPT Male x 1/2" JIC Male (Pack of 4)
By Weatherhead
In Stock
$14.44

mpn: C5205X8,

4.5 out of 5 stars with 58 reviews
Tube fittings are components used for connecting, branching, terminating, and changing the direction of tubing in pneumatic and hydraulic systems. They are made of brass, stainless steel, polybutylene terephthalate (PBT), and other materials that resist corrosion and wear. Tube fittings have various types of connections, including threaded, welded, barbed, and push-to-connect (also called one-touch). Push-to-connect connections do not require tools or sealants. Tube fittings are used in various


Eaton Weatherhead C5205X6X8 Carbon Steel SAE 37 Degree (JIC) Flare-Twin Fitting, Adapter, 1/2" NPT Male x 3/8" JIC Male (Pack of 10)
By Weatherhead
In Stock
$25.88

mpn: C5205X6X8,

4.3 out of 5 stars with 36 reviews
This Eaton Weatherhead C5205X6X8 Flare-Twin adapter connects hydraulic hoses or fittings of different types. It is made of zinc-plated American Iron and Steel Institute (AISI) 12L14 carbon steel for tensile strength, hardness and resistance to corrosion. It has a male 3/8'' Joint Industry Council (JIC) 37-degree flare on one end and male 1/2'' National Pipe Thread (NPT) on the other end for connecting two female threaded fittings. It is 1.69'' in length, with a .297'' inside diameter (ID) and a


Eaton Aeroquip 2018-2-4S Female 37 Degree JIC Swivel to Male Pipe, JIC 37 Degree & NPT End Types, Carbon Steel, 1/4 JIC(f) x 1/8 NPT(m) End Size, 1/4" Tube OD, 1/8" Male Pipe Size
By Aeroquip
In Stock
$21.92

mpn: 2018-2-4S,

4.7 out of 5 stars with 56 reviews
Tube fittings are components used for connecting, branching, terminating, and changing the direction of tubing in pneumatic and hydraulic systems. They are made of brass, stainless steel, polybutylene terephthalate (PBT), and other materials that resist corrosion and wear. Tube fittings have various types of connections, including threaded, welded, barbed, and push-to-connect (also called one-touch). Push-to-connect connections do not require tools or sealants. Tube fittings are used in various


Eaton Weatherhead C5205X12 Carbon Steel SAE 37-Degree (JIC) Flare-Twin Fitting, Adapter, 3/4" NPT Male x 3/4" JIC Male (Pack of 4)
By Weatherhead
In Stock
$11.32
$11.29

mpn: C5205X12,

4.8 out of 5 stars with 51 reviews
This Eaton Weatherhead C5205X12 steel connector adapts a 3/4'' National Pipe Taper (NPT) male threaded end to a 3/4'' JIC 37-degree flare male end. The male flare end creates a compression seal with a working pressure of up to 2,500 pounds per square inch (psi). The fitting is made of carbon steel for durability and resistance to rupture under high pressure and is zinc plated for resistance to corrosion. This Joint Industry Council (JIC) 37-degree flare fitting meets the Society of Automotive En



Viewing Page 2 of 5